Thread: Got new Bird Mounted

Finally got instilation finished. Not quite as bad as Cockrumcrappie had on his Triton but had to take all panels loose on right side to install mount and run new wiring harness, with that swing mount i cut a 4 wide 8 long peice of 1/16 steel plate and drilled holes to match mount. Installed it as a backing plate to stiffen it up. Used a flood lite mount,14IN peice of electrical PVC and 2 threaded fittings to make antenna mount. Drilled 3/4 hole in deck, installed rubber grommet in hole then ran cable through pipe and hole then installed mount. No exposed wires.