I made this Umbrella holder 10-12 years ago for my old Blazer VL100. Well it got stripped out from the boat along with everything else so I could install it on the Skeeter.

Name: Long Net_Umbrella Holder 1.jpg Views: 52 Size: 106.7 KB

First thing first, I didn't weld the pipe exactly straight on the backing plate so to ensure it is square with the deck I first leveled the boat.

Name: Long Net_Umbrella Holder 2.jpg Views: 52 Size: 70.1 KB

After drilling one hole and tightening the fastener enough to hold the Holder in place I squared up the pipe with the deck before finishing mounting. I thru bolted with 1/4-20 SS screws, backed with thick SS fender washers, & used lock nuts so it won't come loose. I plan on using the net handle or umbrella handle to help me stand up from the helm.

Name: Long Net_Umbrella Holder 3.jpg Views: 50 Size: 89.9 KBName: Long Net_Umbrella Holder 4.jpg Views: 53 Size: 63.0 KB

My shortest long handle net wouldn't quite clear the ceiling to put in the holder for a picture but you get the idea with this one.

Name: Long Net_Umbrella Holder 5.jpg Views: 46 Size: 90.2 KB

Picked up this umbrella from Amazon it has a solar reflective topside and non-reflective underside. The pole tilts with a metal tilt fixture instead of plastic, the fabric is vented to help prevent inversions, the pole height has 3 adjustments, and it comes in a storage bag. All for $51.

Name: Long Net_Umbrella Holder 6.jpg Views: 53 Size: 86.7 KBName: Long Net_Umbrella Holder 7.jpg Views: 52 Size: 89.0 KB