Reply With QuoteThe brass splined part drives out towards you as you are looking at the prop on the motor. The plastic part drives out away from you as you are looking at it on the motor. Drive the brass part out first, then the plastic part.
Likes: 0
Thanks: 0
HaHa: 0
Crappie.com 2K Star General
propeller help
I have a mercury optimax 90hp 2010 model. wanted to go down in pitch so I bought a new prop. went to change it today and took my old prop off, I tried to get the flo torq hub out
to put in the new prop and I cant get it out. manual shows one piece sliding out the front and one piece sliding out the back ??? am I missing something ??? tried tapping with piece of wood dowel no luck. does it come apart some other way ?? is it seized ?? need any help I can get. any thoughts BARNACLE BILL ???
thanks
Minnermatics Prostaff
My wife lets me buy all the rods and reels I can hide.
Crappie.com 2K Star General
The brass splined part drives out towards you as you are looking at the prop on the motor. The plastic part drives out away from you as you are looking at it on the motor. Drive the brass part out first, then the plastic part.
Crappie.com 2K Star General
I tried driving it out with a wood dowel no luck, didn't want to use anything metal and burr up the brass. stuck a screwdriver in backwards so plastic handle caught on brass and beat the #^&% out of it. it wont budge???
Minnermatics Prostaff
My wife lets me buy all the rods and reels I can hide.
Crappie.com Legend
Try a little PB Blaster.
HOI Crappie Club
Where family and friends come to compete for a little more than bragging rights.
Quick, someone teach me how to fish so I can win this tournament!!!
Super Mod and 2014 Crappie.com Man of the Year
* Crappie.com Supporter
There is about 6 different versions of the flo torq hub. This is the only one I'm familiar with and as you can see there isn't much to it.
Mercury Flo-Torq II Hub Kit
Fair Winds and Following Seas
Bill H. PTC USN Ret
Chesapeake, Va
Crappie.com 2K Star General
You might try soaking it with PB Blaster, then run it down to your local NAPA and ask them to press it out. When you reinstall, use lots of grease!
Trophy King
What pitch are you going down to? I have a 19 P for a 90 merc. Looking for a 17.
Crappie.com 2K Star General
I've got 2 Mercury props 13 3/4 x 15, and a 13 1/4 x 17 I'd like to sell. They are like brand new and I want $80.00 a piece for them. They are flo torque hub props, but I only have 1 complete hub kit for an extra $18.00.
Crappie.com 2K Star General
I'm at 13 X 21 now, wanting to go to 13 X 19. my manual says I have a flo-torq III hub. prop I was going to try will not fit my motor putting old prop back on for now.
Minnermatics Prostaff
My wife lets me buy all the rods and reels I can hide.
Crappie.com 2K Star General
you runnin aluminum or stainless ??? if you find one I might be interested in yours if it is in good shapeOriginally Posted by Uncle BS
Minnermatics Prostaff
My wife lets me buy all the rods and reels I can hide.
Posting Permissions
