Reply With QuoteI have a 788 ci HD on a terrova with the TD wire run down the shaft slot and thru the lower motor, I haven't noticed any interference, seems to work fine for me.
Likes: 0
Thanks: 0
HaHa: 0
Crappie.com 2K Star General
chances of eletrical interference?
i am about to mount a 898 upfront on the bow of a ranger and have a terrova with ipilot that i was thinking of running the ducer cord down the side of the shaft, is anyone having alot of electrical interference this from this mount or should i consider another way?
Crappie.com Legend
I have a 788 ci HD on a terrova with the TD wire run down the shaft slot and thru the lower motor, I haven't noticed any interference, seems to work fine for me.
GO BIG ORANGE !
I meant to behave, but there were just way too many other options available at the time.
Crappie.com 2K Star General
Crappie.com Legend
Mine works fine..
Member, Tri State Crappie Anglers
Driftmaster's Pro Staff
Crappie.com Legend
Sometimes its just bad luck, sometimes it's how you've got your wires run. I've got mine on a totally seperate power supply, run under the floor straight to the cranking battery (+ & -), and the only thing on this supply. Try to insulate the power wires with small pvc pipe if you can, or just cross any other power wires at a 90* angle, keep the wires away from any other power supply wires as far as possible. There are a couple tricks to reducing or elimnating sources of interference, do a search of the electronics forums and you should find some tips and trips.Originally Posted by gobbler
GO BIG ORANGE !
I meant to behave, but there were just way too many other options available at the time.
Posting Permissions
