
Originally Posted by
mmjokerr
I had the same issue with my pedal. I took the springs off from the bottom and took the top housing off. When you do that you will see a block off white plastic that slides back and forth to make the connection to the Circuit board to make the motor turn. Mine had some bad grease on it that got dirt in it and would not let the slide move freely. I cleaned it all out and used some vaseline to re lube it and have not had a problem since then. I am guessing to make it turn to the right you have to really "stand on it" and hit high on the pedal to get it to eventually turn, or you can hold it down when it it working but have a delay.
I got 2 of these foot pedals and they both suck. You can get replacement boards from most dealers. Bout 60 bucks or so.
Last edited by Cane Pole; 08-14-2009 at 10:01 AM.
Member BS Pro-Staff and Billbob Pro-Staff
Proud Member of Team Geezer... authorized by: billbob and "G"