Reply With QuoteI guess, I'll just go ahead and buy it on first, then get the measurements. Was hoping to get a jump ahead by ordering the thin aluminum for a dividing plate, as it's not Available in my local store...
HaHa: 0
Crappie.com Legend
* Crappie.com Supporter
Mold dimensions
Does anyone have the Small fry mold 12 cavity from Do-it molds that can share the dimensions of the flat sides with me? Don't need the mold thickness, just the side measurements. I looked on the do-it site but the mold dimensions are not shared. Thank you in advance. Eric, aka, Jamesdean.
Proud to have served with and supported the Units I was in: 1st IDF, 9th INF, 558th USAAG (Greece), 7th Transportation Brigade, 6th MEDSOM (Korea), III Corp, 8th IDF, 3rd Armor Div.
1980 Ebbtide Dyna-Trak 160 Evinrude 65 Triumph
Crappie.com Legend
* Crappie.com Supporter
I guess, I'll just go ahead and buy it on first, then get the measurements. Was hoping to get a jump ahead by ordering the thin aluminum for a dividing plate, as it's not Available in my local store...
Proud to have served with and supported the Units I was in: 1st IDF, 9th INF, 558th USAAG (Greece), 7th Transportation Brigade, 6th MEDSOM (Korea), III Corp, 8th IDF, 3rd Armor Div.
1980 Ebbtide Dyna-Trak 160 Evinrude 65 Triumph
Crappie.com 1K Star General
Are you talking about thin aluminum to make a laminate plate? If so why not get some roofing flashing & make it?Originally Posted by Jamesdean
S10CHEVY LIKED above post
Crappie.com Legend
* Crappie.com Supporter
See, I didn't think about roof flashing. Hadn't really crossed my mind. Thank you Les. I will look into it.
Proud to have served with and supported the Units I was in: 1st IDF, 9th INF, 558th USAAG (Greece), 7th Transportation Brigade, 6th MEDSOM (Korea), III Corp, 8th IDF, 3rd Armor Div.
1980 Ebbtide Dyna-Trak 160 Evinrude 65 Triumph
Crappie.com 2010 Man of the Year
* Member Sponsor
We have used metal fleshing in the past many times we used it so we can do a laminate until we got a dual injector.
Crappie.com 1K Star General
And we'd need to know which small fry you're referring to: 1.75", 2.25" or 2.50".
Jamesdean thanked you for this post
Crappie.com Legend
* Crappie.com Supporter
Yes, I recon that would help ...It's the 1.75 CTom. Thank you for Pointing out my lapse...
Proud to have served with and supported the Units I was in: 1st IDF, 9th INF, 558th USAAG (Greece), 7th Transportation Brigade, 6th MEDSOM (Korea), III Corp, 8th IDF, 3rd Armor Div.
1980 Ebbtide Dyna-Trak 160 Evinrude 65 Triumph
Crappie.com Legend
* Crappie.com Supporter
I'll have the dimensions directly...Placed my order today...Not sure when It'll get here with the holiday and all, and lowes in N. Springfield isn't but a mile or so away...Thank you everyone...
Proud to have served with and supported the Units I was in: 1st IDF, 9th INF, 558th USAAG (Greece), 7th Transportation Brigade, 6th MEDSOM (Korea), III Corp, 8th IDF, 3rd Armor Div.
1980 Ebbtide Dyna-Trak 160 Evinrude 65 Triumph
Crappie.com Legend
* Crappie.com Supporter
Just recieved tracking info, supposed to be here Christmas Eve...WooHoo!!!New Mold, Essentials starter kit, and some red and silver eyes to go with what I have from the past...Here goes another deep hole for money to go down...
Proud to have served with and supported the Units I was in: 1st IDF, 9th INF, 558th USAAG (Greece), 7th Transportation Brigade, 6th MEDSOM (Korea), III Corp, 8th IDF, 3rd Armor Div.
1980 Ebbtide Dyna-Trak 160 Evinrude 65 Triumph
Crappie.com Legend
* Crappie.com Supporter
the Small fry mold 1.75-inch is 3 inches by 5 inches with a hinge on the 3 inch end...
Proud to have served with and supported the Units I was in: 1st IDF, 9th INF, 558th USAAG (Greece), 7th Transportation Brigade, 6th MEDSOM (Korea), III Corp, 8th IDF, 3rd Armor Div.
1980 Ebbtide Dyna-Trak 160 Evinrude 65 Triumph
