Thread: Another Wrap For Continued Learning

There are now 5 each passes on the A,B axes as well as the C,D axes. A,B going left to right and the C,D axes going right to left. On these two axes I refer , mostly to my self, the north 2 and south 2. North being A and c and of coarse the south being B and D. Helps me keep it straight. Onward and upward. Middle yellow/orange is up...

Sent from my SM-S916U using Crappie.com Fishing mobile app

In this picture, you can start to see a hint of the darker yellow orange at the sides of the yellow...

Sent from my SM-S916U using Crappie.com Fishing mobile app

Not much done today. I did finish the middle yellow orange, though hard to see the difference without blowing up the picture. Hopefully tomorrow I will finish this wrap.
I will say it's easier to see any threads that aren't laying right with the lighted magnifier...
Also had a suggestion in the rods to use, which makes a bit more sense...instead of using a wooden dowel, which will and does grab the thread at times...use either an old piece of fishing rod or a piece of pvc pipe. This came from Mary Christy on The Decoritive Studio on YouTube...once again thank you all for following me as I share what I'm Leaarning In Decoative Rod Wraps.

Sent from my SM-S916U using Crappie.com Fishing mobile app

Morning everyone, I have the cross wraps done. This I would say is a diamond pattern. I figured out what I am doing wrong for this not coming out as a chevron pattern. So next up is a chevron pattern...
It's a little hard to make out all three colors here. But blow up/enlarge the picture and you can see the suttle change in the first two colors. This is the raw thread, no color preserver or epoxy on yet...

Sent from my SM-S916U using Crappie.com Fishing mobile app

I imagine those colors would pop off a black rod. Looks good.

Here is the yellow to orange diamond just before Color Preserver...Attachment 503517

Sent from my SM-S916U using Crappie.com Fishing mobile app

In this picture if you enlarge it, you can make out an almost shadow to th darkest color just toward center of it. I think it could be a shade darker or two and it would show up better. Dave, I think your right on the black rod, or at least a dark colored rod. Over all, I'm happy with the way it turned out. All the threads are packed tightly together, with no spaces to show what's under the thread where it shouldn't.

Sent from my SM-S916U using Crappie.com Fishing mobile app

That all looks good Eric. I see you using sewing thread and I wonder if you’ll tie guides with it? Your patterns are spot on and the color transitions look good. I also notice that you use color preserver. While building a rod, color preserver does maintain the color brilliance but it also fills the void that the epoxy would soak through to adhere to the blank and make a super strong winding. Not all threads need preserver and they’re known as colorfast. Colors slightly vary from colorfast to nylon but they’re very close. With black it doesn’t matter and the nylon works very well. Fooling with some of the nylon threads and the epoxy coatings is kinda fun too. I’ve used a dark red nylon on one of my rods and it darkened even further and gave a rich looking color that shows well in sunlight but muted in inside lighting. You’re doing very well and clearly having fun doing it, and that’s the most important thing to me. I’ll look in again soon and see what you’ve come up with.