Spider rig placement help!

**SlabSeeker0485** · 05-31-2018, 02:15 PM

Originally Posted by slabin

Move seat bases closer and use rivnuts to mount the bases. If you have never used rivnuts they are solid as a rock when installed correctly.

Where is the best/least expensive place to buy the rivnuts and gun?

**2boatjoe** · 05-31-2018, 02:20 PM

Look for wingits

Sent from my SAMSUNG-SM-N920A using Crappie.com Fishing mobile app

**2boatjoe** · 05-31-2018, 02:21 PM

That's wrong not wingits I can't remember what they're called when I think of it I'll let you know

Sent from my SAMSUNG-SM-N920A using Crappie.com Fishing mobile app

**2boatjoe** · 05-31-2018, 02:22 PM

Plus nuts that's it you can buy them they come with a tool to put them on

Sent from my SAMSUNG-SM-N920A using Crappie.com Fishing mobile app

**3Redfish** · 05-31-2018, 02:39 PM

Try an offset pedestal post. That will allow your seat to swivel 4-6 inches forward, then backward for trolling motor foot control. I use this setup and it makes a big difference on back comfort while reaching for rods.

**SlabSeeker0485** · 05-31-2018, 02:41 PM

Originally Posted by 2boatjoe

Plus nuts that's it you can buy them they come with a tool to put them on

Sent from my SAMSUNG-SM-N920A using Crappie.com Fishing mobile app

Will the tool screw into a regular rivet gun? Or is it a differing gun all together

**2boatjoe** · 05-31-2018, 02:42 PM

The tool is some washers a spacer and a bolt. Comes with them most of the time

Sent from my SAMSUNG-SM-N920A using Crappie.com Fishing mobile app

**Northforker** · 05-31-2018, 02:47 PM

https://www.
.amazon.com/gp/product/B003TODXQW/ref=oh_aui_detailpage_o09_s00?ie=UTF8&psc=1

https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1

Rivnut gun and aluminum rivnuts

**SlabSeeker0485** · 05-31-2018, 02:48 PM

Originally Posted by Northforker

https://www
.amazon.com/gp/product/B003TODXQW/ref=oh_aui_detailpage_o09_s00?ie=UTF8&psc=1

https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1

Rivnut gun and aluminum rivnuts

Thanks! I have a regular river gun but guess I just need the screw in tool and some aluminum rivets

**Tom 513** · 05-31-2018, 05:12 PM

They fit fine on my tracker, its around 6ft wide

Originally Posted by SlabSeeker0485

I don’t think my boat is wide enough to accommodate 2 seats up there with trolling motor. Them dudes are expensive lol. Do u know if they make a single post extension like that?

Sent from my SM-J727V using Tapatalk

Thread: Spider rig placement help!

Thread Tools

Display

Offset post

Tags for this Thread

Posting Permissions