Thread: I need HB bow 360 measurements...

The pix are fine...

Now I just need the diameter and length of the shaft....

Rickie

Rickie, picture (1) and (4) gives you all the info.

Take your beer goggles off and put your glasses on , its all on there. 1.125 - 1.128 x 21.250 not counting head

Originally Posted by wilbur

Take your beer goggles off and put your glasses on , its all on there. 1.125 - 1.128 x 21.250 not counting head

Duh...I am blind...(or maybe just rely too much on this small iphone screen)...

Thanks rdjj...

These will work just fine...

Rickie

Hey rdjj...

Can you tell if the clamp attachment would remove from the 360 shaft without much trouble ...??

Rickie

Rickie, the 360 TM shaft just slides right out of the clamp on the shaft. When you take it out of the box the attachment for your TM is not assembled with the shaft of the 360. That clamp lets you adjust the depth of the 360 in the water. If you look at my pictures you well see I have a lot of the shaft out the top because I only need a 42" TM on my boat. dj

Originally Posted by rdjj71m

Rickie, the 360 TM shaft just slides right out of the clamp on the shaft. When you take it out of the box the attachment for your TM is not assembled with the shaft of the 360. That clamp lets you adjust the depth of the 360 in the water. If you look at my pictures you well see I have a lot of the shaft out the top because I only need a 42" TM on my boat. dj

Thanks rdjj... I was hoping it was easily removed because the clamp is not going to be necessary with da'ducer apparatus® 360 ...

It's going to make a much more compact looking design with only the 360 puck at the bottom of the da'ducer apparatus® telescoping shaft ... (the 360 shaft will be inside the da'ducer apparatus® shaft) ...

Thanks for all your help ...

Rickie

Rickie you have the 360 daducer mount ready to sell? Send me a pm.