Printable View
Rickie see Attached:
Attachment 167461[ATTACH=CONFIG]167462
[/ATTACH]Attachment 167462
Attachment 167463
Attachment 167464
Attachment 167465
Rickie I have a few more .... Cable from 360 is 8' long .. 3' cable to control head with connections .. let me know if you need more info.
The pix are fine...
Now I just need the diameter and length of the shaft....
Rickie
Rickie, picture (1) and (4) gives you all the info.
Take your beer goggles off and put your glasses on , its all on there. 1.125 - 1.128 x 21.250 not counting head
Duh...I am blind...(or maybe just rely too much on this small iphone screen)...Quote:
Originally Posted by wilbur
Thanks rdjj...
These will work just fine...
Rickie
Hey rdjj...
Can you tell if the clamp attachment would remove from the 360 shaft without much trouble ...??
Rickie
Rickie, the 360 TM shaft just slides right out of the clamp on the shaft. When you take it out of the box the attachment for your TM is not assembled with the shaft of the 360. That clamp lets you adjust the depth of the 360 in the water. If you look at my pictures you well see I have a lot of the shaft out the top because I only need a 42" TM on my boat. dj
Thanks rdjj... I was hoping it was easily removed because the clamp is not going to be necessary with da'ducer apparatus® 360 ...Quote:
Originally Posted by rdjj71m
It's going to make a much more compact looking design with only the 360 puck at the bottom of the da'ducer apparatus® telescoping shaft ... (the 360 shaft will be inside the da'ducer apparatus® shaft) ...
Thanks for all your help ...
Rickie
Rickie you have the 360 daducer mount ready to sell? Send me a pm.
PM sent...Quote:
Originally Posted by Redge
Rickie