Thread: How to Make a Set of Drift Chains

Originally Posted by Rees Guide

Slide right through, way easier on stake beds than socks are.

Yeah I can see that.... I know my luck. If there was any way for it to hang or uproot someone's crappie bed it would do it with me. Lol.


Sent from my iPhone using Tapatalk

Originally Posted by bandchaser

I have read before that some people put a piece of rope between the chains and your main line that will have some stretch, flex or give.
Also, it appears that most folks first section of chain is 5 to 6 feet long. Just want to get some ideas and how folks do it, there is always a trick or two to.make something better, or easier.
Thanks!

Sent from my SM-G900V using Tapatalk

One thing you can do, get a bicycle or motorcycle inner tube. Cut it and slide over chain up to rope, wire tie it tight with a couple of ties. That way you won't beat up your gelcoat.

Very rarely does my chains touch the gelcoat, I use a 18v drill case laid open on the back deck, pull the rope until the chain gets to the rub rail laying the rope in the box as I go, lift the chain kinda swishing off any mud or trash off of it and then lay the chain in the box on top of the rope. When fishing a good bit I just leave the rope connected to the cleat and the box laying open on the back deck, rides all over the state like that.

I do the same thing Rees Guide, only I use a 3 gallon feed bucket to store my chain.

I use the bucket as well

Originally Posted by Speck

I do the same thing Rees Guide, only I use a 3 gallon feed bucket to store my chain.

I use 2 9ft sections of 3/8. And if that doesn't work I have 2 more sections of 5ft 3/8.

Sent from my SAMSUNG-SM-N920A using Tapatalk

Originally Posted by martyrm

I use 2 9ft sections of 3/8. And if that doesn't work I have 2 more sections of 5ft 3/8.

Sent from my SAMSUNG-SM-N920A using Tapatalk

Chains stopping that rig of yours is a true example of how well they work.

Well, tomorrow is going to be the test trip for my new set of Drift chains. Bought 15ft of 3/8" logging chain, and a 50ft hank of marine rope, and few chain clips.
Wind is suppose to blow steady tomorrow with this cold front pushing thru. Appreciate the assistance and ideas. I know it's a simple thing but sometimes there is a better mouse trap!

Sent from my SM-G900V using Tapatalk