Not enough room for me

**BigRiverMarine** · 05-19-2013, 08:09 PM

Originally Posted by martyrm

Do they make a single. I actually remembered some of your pictures with this setup and was going to call you.

I don't think they make a single. Never been ask tho. I'll check for ya.

**martyrm** · 05-19-2013, 08:23 PM

Thinking of taking that tubing off and getting better mounts and mounting straight to the floor and more to the corner

**Big H trucking** · 05-19-2013, 08:27 PM

Call scott at hitek he will build u a rod holder set up that has a off set in it. Off set could be outward a few inchs and then your seat would be fine. Sell those rod holders or move to side or rear of toon.

**Cray** · 05-19-2013, 09:06 PM

Marty, going to assume that post is 1/2 in. Find you a piece of flat stock about 2in wide and 4in long. Drill a 1/2 in hole in each end. Use short bolt to mount it to base then use a nut underneath to mount stem. May need 2 on stem to lock to plate. Should give you enough offset cheap to build another if it dosnt.

**canebreaker** · 05-20-2013, 09:41 AM

I have about a foot of 1 X 2" rect. tube if you want to try that.

Thread: Not enough room for me

Thread Tools

Display

Posting Permissions