Thread: Is replacing your impellor really this easy?

In going tomorrow n getting a new one. I done took it out now lil

Originally Posted by TUSHHOG

On a serious note....
The worst thing you could ever do for a water pump... Is crank your outboard out of water dry.. The water works as a lubricant. If you start it dry the friction will burn the ends off of your impellers. It only takes a minute. I see it all the time people cranking their engines before they put it in the lake. Wet is good... Dry is bad... Just like...well I best not!!!

Don...you can do it, take your time!!!

Hahaha! Sardis ramp last week: I'm strapping down the boat when I hear a helicopter comeing...nope, it was a guy pulling up the ramp with his motor running and in gear!

I got a 60 horse Mercury and you best not even look at the key unless it's in the water or the water hose on it.

I have just bumped the starter before and messed it up.

I have changed it about 3 times that I can remember, I buy them two at a time now.

I usually put a little grease on mine to aid in getting it all in there.

Originally Posted by DonDon

Doesn't look bad n when I blow water through the Jose it appears to be blog freeAttachment 120273

Who's Jose'

Sent from my SAMSUNG-SGH-I777

Originally Posted by feelay

Hahaha! Sardis ramp last week: I'm strapping down the boat when I hear a helicopter comeing...nope, it was a guy pulling up the ramp with his motor running and in gear!

Makes me cringe when I hear people start em up out of the water.

Sent from my SAMSUNG-SGH-I777

Reaaaaal easy

Cuervo lol

UOTE=KDAVID1;2269498]Who's Jose'

Sent from my SAMSUNG-SGH-I777[/QUOTE]

Originally Posted by "G"

Thats not good DD...It only takes a second to damage the tips of the impellor....... Get a set of muff to put on it if you want to see if it cranks

Never want to do without the muff!!