Likes Likes:  0
Thanks Thanks:  0
HaHa HaHa:  0
Results 1 to 8 of 8

Thread: Anybody know Onan generators?

  1. #1
    Join Date
    Aug 2005
    Location
    WNC
    Posts
    307
    Post Thanks / Like

    Default Anybody know Onan generators?


    I'm putting one on my pontoon, I picked this up at a yard sale, it's an Onan 2.8, it has what appears to be a wiring harness for a dash mount start/stop switch. Wires are red/orange/yellow/brown/black, anybody know what is what? Or where/how I can find this info? Also, how should I ground this unit when I install it...just to the generator (isolated from the toon frame), or also to the frame of the toon?
    TIA
    Last edited by snal; 09-22-2005 at 05:38 PM.
    Snal~
    1992 Alumacraft 14' Jon Boat w/ 15hp Johnson
    1988 Party Barge w/Rude 90hp (project finished!)
    1994 C Dory 22 Angler w/ twin Honda 45's
    7 Kayaks, 1 canoe
    www.snartracing.com (my other passion)

  2. #2
    Join Date
    Aug 2004
    Location
    Michiana, Indiana
    Posts
    345
    Post Thanks / Like

    Default

    The last onan gen I saw was on a RV. I would start there. I would run a ground to the rails and tubes.go to onan.com/.

  3. #3
    Join Date
    Sep 2005
    Location
    Elton, Louisiana, United States
    Posts
    7,715
    Post Thanks / Like

    Default

    This may help you out, not sure though....good luck

    http://www.funroads.com/gensets/PDF/...22A2CTFJMXSFEQ
    You can't fish with a hung line!

  4. #4
    papasage's Avatar
    papasage is offline Crappie.com 2011 Man of the Year & Moderator GA * Crappie.com Supporter
    Join Date
    Apr 2004
    Location
    Fitzgerald Ga. 31750
    Posts
    6,447
    Post Thanks / Like

    Default

    i was tol that a genirator nois would run the fish off . some one told me they wer fishing off their dock catching crappie and when a pontoon pulled up with a genirator running the fish quit bitting and when they left they came back . could have ben one of those noisey ones . i just git a couple of deep cyckle batteries . that will last as long as i wan`t to stay out . never run anything on the cranking battery .
    i have herd if some catching fish with a genirator running . you should be able to go to onan site and fin the closest repair dealer . git the phone #and call . that is what i did when mine gave me some probablems on my motorhome
    you shouldn`t need to ground it to the toon frame . it puts out 110 and the boat light and all are 12 volt . the lights arenot grounded to frame but if one did make contack it could do some damage . the wires you are speaking of is probabley goes to a controle pannel .

    try this site . just remembered i had this in my favorits. http://www.perr.com/onan.html
    Last edited by papasage; 09-23-2005 at 03:44 AM.
    retired and now i will always fish

  5. #5
    Join Date
    Aug 2005
    Location
    WNC
    Posts
    307
    Post Thanks / Like

    Default

    Thanks Papasage...the generator is for camping aboard, and for powering the battery charger mainly. I'll be keeping this boat at the lake, and there's no power available in the storage yard, or at the docks. It's overkill, but I've had this thing for a few years, and never used it for anything...might as well get some use out of it.
    Snal~
    1992 Alumacraft 14' Jon Boat w/ 15hp Johnson
    1988 Party Barge w/Rude 90hp (project finished!)
    1994 C Dory 22 Angler w/ twin Honda 45's
    7 Kayaks, 1 canoe
    www.snartracing.com (my other passion)

  6. #6
    papasage's Avatar
    papasage is offline Crappie.com 2011 Man of the Year & Moderator GA * Crappie.com Supporter
    Join Date
    Apr 2004
    Location
    Fitzgerald Ga. 31750
    Posts
    6,447
    Post Thanks / Like

    Default

    that sounds like a good deal . you use a battery and not the genirator for running the lights .when the battery starts going down then crank the genirator .
    retired and now i will always fish

  7. #7
    Join Date
    Aug 2005
    Location
    WNC
    Posts
    307
    Post Thanks / Like

    Default

    Ok...I figured out part of it. Yellow wire feeds positive for the start circuit, brown wire feeds positive for the stop circuit.
    The biggie now is how to ground the 120v AC. I've been told to ground to an anode at the frame of the boat, and not to ground to the frame at all (just to the generator, isolated from the frame of the boat).
    Snal~
    1992 Alumacraft 14' Jon Boat w/ 15hp Johnson
    1988 Party Barge w/Rude 90hp (project finished!)
    1994 C Dory 22 Angler w/ twin Honda 45's
    7 Kayaks, 1 canoe
    www.snartracing.com (my other passion)

  8. #8
    papasage's Avatar
    papasage is offline Crappie.com 2011 Man of the Year & Moderator GA * Crappie.com Supporter
    Join Date
    Apr 2004
    Location
    Fitzgerald Ga. 31750
    Posts
    6,447
    Post Thanks / Like

    Default

    you dont need to ground to the boat it is grounded in the genirator . a genirator is supose to besat on the groung or anywhere . no wires hooks to antything except the powercord
    retired and now i will always fish

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

BACK TO TOP