Quote Originally Posted by rnvinc View Post
Might think about drilling all the way thru the D shaft and into the housing on the other side ... then use a thru pin (thru pins can be found with a knurled section on one end to “grip” into the housing and not allow the pin to back out) ...

Or use a spring pin (slotted spring steel pin makes tight fit) ...

Just use the correct drill bit for the pin to be used ...

Rickie
I thought about this Rickie. The shaft is about 25mm L. My tabletop press is worn out and I would break the drill bit with my shaky hands. Age restrictions complicate things for me.

Sent from my SM-A526U1 using Crappie.com mobile app