Thanks Thanks:  0
HaHa HaHa:  0
Results 1 to 10 of 10

Thread: What am I missing?

  1. #1
    Join Date
    Oct 2012
    Location
    Bowling Green, Kentucky, United States
    Posts
    929
    Post Thanks / Like

    Default What am I missing?


    My home lake is Barren River Lake which holds a good deal of better than average size crappie and enough dinks to keep its future bright. So why is it that I can't seem to do very well pulling crank baits, best day so far has been 3. I parallel points, humps, pull across them. I change color, depths speed, doesn't seem to mater. As creel clerk I interview people who say they do well pulling cranks but as of yet, I haven't seen the first boat in action. (do fishermen lie) I can go to another lake, Malone, and catch 20-25 a day, but the fish that come from there are pretty thin and on the short side. Am I doing something wrong? I troll with 2, 14' rods, one out each side, 2 out the front, each has a 3oz weight for depth adjustment, and 2 out the rear of the boat. Is it the lake? Winter draw down pulls the lake about 25'. There are areas with a depth of 70', and the thermocline has set in for the summer at about 20'. Just thought I'd throw it out on the table and see if I'm missing something.
    Everything is possible. The impossible just takes longer!
    Likes bkgooch LIKED above post

  2. #2
    Join Date
    Mar 2009
    Location
    kings mountain ky
    Posts
    1,293
    Post Thanks / Like

    Default

    im missing it too.things have been terrably SLOW on green for me.i dont troll cranks but i uasally catch 15-20 spyder riggin or vert jigging,but not lately.i dont know what the heckis goinon.

  3. #3
    CrappiePappy's Avatar
    CrappiePappy is offline Super Moderator - 2013 Man Of The Year * Crappie.com Supporter
    Join Date
    Apr 2004
    Location
    Lexington, KY
    Posts
    24,404
    Post Thanks / Like

    Default

    According to this : Louisville District > Missions > Civil Works > Water Information > Updated Lake Temperatures and Dissolved Oxygen Lev > Barren Profile

    ... the greatest O2 drop occurs from 12ft to 14ft deep, and any depth below 14ft is a dead zone. The biggest temp drop occurs from 10-14ft ( a 5deg F. drop from 78 to 73deg F.)
    Now, these reading ARE taken at the dam, so depths and readings may differ in other areas of the lake.

  4. #4
    M R Dux's Avatar
    M R Dux is offline Crappie.com Legend , 2018 Crappie.com Man of the Year * Crappie.com Supporter * Member Sponsor
    Join Date
    Mar 2008
    Location
    Benton,KY / KY Lake
    Posts
    7,582
    Post Thanks / Like

    Default

    Pay attention to your electronics and let it tell you where the bait is. The crappie will be where the bait is, whether it be on top of the drops in shallow water, suspended shallow over deep water, wherever. Lots of folks miss the best summer has to offer by thinking deep,deeper,and deepest.
    www.crappie-gills-n-more.com
    Podunk Ideas Pro Staff /test platform
    PICO Lures Field Rep
    Excel Boats Pro Staff
    Likes Hotpepper, bkgooch, crp4570, chaunc, dallman LIKED above post

  5. #5
    Join Date
    Feb 2008
    Location
    Franklin, KY
    Posts
    757
    Post Thanks / Like

    Default

    Try that drop in Peter creek. I caught crappie on cranks on it. Just go back and forth on it. Sometimes they are on top, sometimes suspended out on the deep side.

    I marked fish on it about 45 mins ago but we were catfishing today.

  6. #6
    Join Date
    Oct 2012
    Location
    Bowling Green, Kentucky, United States
    Posts
    929
    Post Thanks / Like

    Default

    Pappy I was going by my depth finder when I said thermocline. I did see bait balls, some round and some look like they've been gone thru by fish. Staying at level and just above.
    Everything is possible. The impossible just takes longer!

  7. #7
    Join Date
    Feb 2008
    Location
    Franklin, KY
    Posts
    757
    Post Thanks / Like

    Default

    I am going to start a thread in the electronics forum on this but I would be curious to see what the thermocline looks like on your graph. I think I saw it on mine yesterday but I am not 100% sure. I turned the sensitivity to 14 (1-20) on my 859 and was picking up what looked like static or fuzz on anything below about 17 feet. Is that what it looks like?
    Likes slabseeker1 LIKED above post

  8. #8
    CrappiePappy's Avatar
    CrappiePappy is offline Super Moderator - 2013 Man Of The Year * Crappie.com Supporter
    Join Date
    Apr 2004
    Location
    Lexington, KY
    Posts
    24,404
    Post Thanks / Like

    Default

    Quote Originally Posted by smashdn View Post
    I am going to start a thread in the electronics forum on this but I would be curious to see what the thermocline looks like on your graph. I think I saw it on mine yesterday but I am not 100% sure. I turned the sensitivity to 14 (1-20) on my 859 and was picking up what looked like static or fuzz on anything below about 17 feet. Is that what it looks like?
    My Lowrance unit picks it up as that, or a thin line of "static" pixelation running across the screen at a narrow depth range.

    If the lake you are referring to is Barren ... according to this : Louisville District > Missions > Civil Works > Water Information > Updated Lake Temperatures and Dissolved Oxygen Lev > Barren Profile ... 17ft would be about right for a thermocline level.

  9. #9
    Join Date
    Oct 2012
    Location
    Bowling Green, Kentucky, United States
    Posts
    929
    Post Thanks / Like

    Default

    I trolled again today.
    Attached Images Attached Images  
    Everything is possible. The impossible just takes longer!

  10. #10
    Join Date
    Oct 2012
    Location
    Bowling Green, Kentucky, United States
    Posts
    929
    Post Thanks / Like

    Default

    Name:  image.jpg
Views: 345
Size:  76.9 KB
    Everything is possible. The impossible just takes longer!

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

BACK TO TOP