Thread: MDI TM transducer question

Good to know. I am running the Y cable with the Mega SI transducer that came with the Helix on the transom and the XTM 9 MDI attached to the trolling motor. I have unplugged the us2 cable and coiled it up under the front deck. I am running this on a 16 ft stick steer, so Helix is mounted on front deck.
A lot of different parts with this. I reset to factory defaults on the Helix prior to the upgrade, so it will take me a little time to adjust settings again with the new software and transducer, too,
I had looked at that transducer previously, but HB said it would only work on 80 lb thrust motors and above, as it needed clearance between the skeg and prop that the 55 lbs didn't provide.
Thanks again.

Sent from my SM-T580 using Crappie.com Fishing mobile app
Li