Thread: How do you????

Try this?

Remote Learning
The i-Pilot Link remote is prelearned to the controller from the factory. The top ofthe controller has a single learn button to allow additional remotes to be addedto the system. To learn additional remotes:
1. Power up the trolling motor.
2. Push and hold the learn button down. A steady audio tone willbe heard while holding this button.
3. While holding the learn button on the controller, from the remote home screen select:Settings > Learn and press the OK key
4. If the learn process was successful, the controller will respond with four beeps.
Inaddition, the Dashboard section of the remote will begin to display motor statusinformation such as prop speed.
A remote can only be learned to one controller at a time.
A controller can have up to4 remotes learned to it and actively communicating with it.

Vic, I think this is referring to learning another link controller to the motor. What he is trying to do is learn the mini remote that you can buy for the Ilink Terrova to the motor.

Originally Posted by cray

Vic, I think this is referring to learning another link controller to the motor. What he is trying to do is learn the mini remote that you can buy for the Ilink Terrova to the motor.

I have no knowledge of the link system....I just looked up the owner's manual and pasted in what I found. Sorry if this info is incorrect. Just trying to help

Minn Kota Motors | Minn Kota Motors