Transom mount 360 units come with a HS GPS puck, my question is should the HS puck be mounted as close to the 360 unit as possible or can it be mounted up in the bow and do double duty working over the TM ?


I have a 1198 mounted at the helm with its own gps puck at the transom, then a second station set up at the bow with transducer on the trolling motor and a gps puck

I'm going to add an 1159 DI unit to the bow (real pain moving it all the time from the helm to the bow and back) so hence the question of if HS puck can do double duty mounted at the bow.

my wash tub is 17ft long so I'm sure there is an offset of 17ft, but other than that will the 360 and the 1100's read from the HS at the bow

also will I be able to use the bow gps puck with bow locator and the transom puck with the transom transducer for the helm unit say when on plane moving from place to place

Oh all are to be linked with a 5 port Ethernet switch

as soon as I'm sure this will all work together I'm pulling the plug with Brian at BBG


as always thanks to all for your help