Reply With QuoteIt is a touch screen. Touch it, don't tap it.
You may need to calibrate your touch positions on the screen. The procedure for calibrating the touch screen is defined in the maintenance section of the operators manual.
Likes: 0
Thanks: 0
HaHa: 0
Slabmaster II
Gen 2 Lowrance HDS Touch Screen problem
Fishing with my buddy and he accidentally tapped the screen and the screen went black turned it off and turned it on logo comes on and it goes black we know about the power button you tap on it and it get lighter. We started tapping other buttons and it finally came back to normal. can anyone tell me what we did wrong and how to correct it it would be greatly appreciated
Crappie.com 2011 Man of the Year
* Crappie.com Supporter
It is a touch screen. Touch it, don't tap it.
You may need to calibrate your touch positions on the screen. The procedure for calibrating the touch screen is defined in the maintenance section of the operators manual.
Member BS Pro-Staff and Billbob Pro-Staff
Proud Member of Team Geezer... authorized by: billbob and "G"
Trophy King II
* Crappie.com Supporter
If you hit the power save button that is what it does the logo will go on and off.
Retired USN
Crappie.com 1K Star General
It doesn't sound like something normal. Just tapping the screen should not cause the unit to turn off unless the shutdown pop-up window was already opened and just happened to "tap it" in the right place.
As Cane Pole mentioned above, I would also calibrate the screen. (If you haven't done it already)
I would say keep an eye on it and if it starts shutting down or doing strange things, do a hard reset. If that doesn't resolve the problem, give Lowrance customer service a call.
Brian
Slabmaster II
Crappie.com 2K Star General
It almost sounds like you had it in standby...?
