Likes: 
Thanks: 
HaHa: 
Reply With QuoteFrom the definition of 7.09 on HBs web site it is identical to 7.08. Screwup on the definition?
Crappie.com 2K Star General
Yes,but when I go out today I'll have 7.090 installed.ive already got it downloaded,just need to install.Originally Posted by rnvinc
Slabmaster
From the definition of 7.09 on HBs web site it is identical to 7.08. Screwup on the definition?
Crappie.com 2016 Man of the Year
* Member Sponsor
That's fine...I'm using you to investigate if the zigzag in the SI has been fixed...
My 1197 is past the point of getting new updates...so your test will help users with xx8 series SI units...
____________________________
One other thing I would like for you to try and notice...
Does the SI screen scroll rate change between the 2 separate "Beam Select" settings of 200kHz only vs 83kHz only...??
Rickie
Last edited by rnvinc; 06-01-2014 at 08:49 AM.
www.podunkideas.com <--Click here
------------—————
https://www.crappie-gills-n-more.com/
https://cornfieldfishinggear.com/
------------------------>> Pro Staff Sonar Advisor
Crappie.com 1K Star General
Crappie.com 2K Star General
If you are correct,then no harm,just a reinstall with different software v. LABLE.
Crappie.com 2K Star General
scroll speed is becoming an issue imo.its appears to me that (BIG BROTHER)is slowly dictating the scroll speed that we need,which is better for most,but for the few that like to experiment its not so good.(just as well leave your units on default setting)
Crappie.com 2016 Man of the Year
* Member Sponsor
BIG BROTHER...interesting way to put it...
Rickie
www.podunkideas.com <--Click here
------------—————
https://www.crappie-gills-n-more.com/
https://cornfieldfishinggear.com/
------------------------>> Pro Staff Sonar Advisor
Minnow
Am I wrong here thinking that HB is offering the incorrect software for the Ilink controller? I was able to push version 7.090 to both of my 1198s, but when I downloaded the updates for the controller and remote, they would not push. I went back to the site and read a little more on the updates. Looks like 2.070 is only for ONIX or ION, but that is what I got when I used the hyperlink for the Ilink controller. Although I did get version 2.02 for the remote? So I'm still stuck at version 1.160 for both my controller and remote. I'm going to the lake tonight to give it a shot, as I tried to push it in my garage with the motor deployed.
Last edited by sparkchaser737; 06-01-2014 at 09:49 AM.
Crappie.com 2016 Man of the Year
* Member Sponsor
If your issue is not resolved with your planned test...be sure and start a dedicated thread dealing with your problem so that it gets ample attention dealing specifically to help you ...and doesn't get lost down in the body of this thread...
Rickie
www.podunkideas.com <--Click here
------------—————
https://www.crappie-gills-n-more.com/
https://cornfieldfishinggear.com/
------------------------>> Pro Staff Sonar Advisor
Crappie Wall Hanger II
ALL v7.090 today.....
BELOW that listed S/W for Onix are the ones you want - and reboot between each install.
I just did an 899 a few days ago and it didn't like one of the SD Cards and I had to reboot both the HB & Terrova to get it done.
Make sure you have a .BIN extension - the Onix is another format (.PKG).
http://i189.photobucket.com/albums/z..._Remote202.jpg
I monkeyed up the DI enhance & never reset it so a few shots look a bit gritty and it was breeeeeZY out there today, as you'll see in some of the shots taken on the lee side of things it was still pretty bad ("10-20's" or so they said!).
FWIW, When on the gas motor the right side is a bit blind from the motor & hydrofoil too.
First few shots are just the 200 KHz which I prefer anyways, All shots were taken on the 998c HD SI though I was using the 899 @ the bow for a plotter off the HS puck also & shared sonar data most of the day with the 998's HDSI on 455.
The 200/83 doesn't look very good to me - and I didn't notice about the scroll speeds changing. I was either on the gas motor around 2.8MPH and a SI chart of 3 (on a scroll of 2 the DI wanks out with the white out lines we've seen in the past) AND if I was running the i-Pilot, it was SI chart speed of 1 and I was running 1.2-1.5 MPH.
LMK if you can't see these - I'll post separate links or PM/email to you-
http://s189.photobucket.com/user/sfw...?sort=3&page=1
This was 200/83:
This was 200:
I still prefer the 200 Khz - the 200/83 was off the TM & the other was off the gas motor, so they'll be a scroll speed diff....
LMK if any of that's useful for you - otherwise we'll wait for Kos & see what he says - I agree in BIG BROTHER "helping to save us from ourselves" too!
RAS
Last edited by sfw1960; 06-01-2014 at 07:01 PM.
Posting Permissions
