Thread: best depthfinder under $700

A couple of things to consider here guys:

1. The 500 series units cannot be Ethernet connected to any other units as they do not have the Ethernet connector on them nor the circuitry and programming for this. They are stand alone units only. You have to move up to a 700 or larger series units to be able to Ethernet connect them and share any data – and not all of the 700 series units have this capability.

2. Even though the 858c DI (also the 788ci HD DI, 958c DI and 1198c DI) units have the Ethernet connector; they cannot at this time share the DI sonar with a non-DI model unit. The Side Imaging units that have Ethernet capability (798ci HD Si, 898c Si, 998c Si, 1197c Si and 1198c Si) have a different Di sonar and cannot use the DI sonar from the DI model units (788ci HD DI, 858c DI, 958c DI and 1198c DI).

For about $700 you should be able to get a 788ci HD or 788ci HD DI model unit and add the Ethernet connection later (if you want to); otherwise you could go with the 597ci HD DI model already mentioned and keep some of that money.

Originally Posted by Humminbird_Greg

A couple of things to consider here guys:

1. The 500 series units cannot be Ethernet connected to any other units as they do not have the Ethernet connector on them nor the circuitry and programming for this. They are stand alone units only. You have to move up to a 700 or larger series units to be able to Ethernet connect them and share any data – and not all of the 700 series units have this capability.

2. Even though the 858c DI (also the 788ci HD DI, 958c DI and 1198c DI) units have the Ethernet connector; they cannot at this time share the DI sonar with a non-DI model unit. The Side Imaging units that have Ethernet capability (798ci HD Si, 898c Si, 998c Si, 1197c Si and 1198c Si) have a different Di sonar and cannot use the DI sonar from the DI model units (788ci HD DI, 858c DI, 958c DI and 1198c DI).

For about $700 you should be able to get a 788ci HD or 788ci HD DI model unit and add the Ethernet connection later (if you want to); otherwise you could go with the 597ci HD DI model already mentioned and keep some of that money.

Hey Greg how about checking on my 787c yall have in service dept. I really need that puppy back......THANKS!!!!

Gator,
I would need to know your name and address to check on your 787c unit. Send me a direct e-mail with this info or just call the Humminbird Customer Resource folks at 1-800-633-1468 and check on it.

Originally Posted by Humminbird_Greg

Gator,
I would need to know your name and address to check on your 787c unit. Send me a direct e-mail with this info or just call the Humminbird Customer Resource folks at 1-800-633-1468 and check on it.

Check your PM's.... THANKS!!!

[QUOTE=Humminbird_Greg;1715948]A couple of things to consider here guys:



1. The 500 series units cannot be Ethernet connected to any other units as they do not have the Ethernet connector on them nor the circuitry and programming for this. They are stand alone units only. You have to move up to a 700 or larger series units to be able to Ethernet connect them and share any data

I see cabelas has the humminbird 587c hd di on sale for around $450, how does this unit compare to the 597c hd di unit?

Originally Posted by mkeller

I see cabelas has the humminbird 587c hd di on sale for around $450, how does this unit compare to the 597c hd di unit?

I may be wrong, but I don't think the 587 series has DI...so it is about $100 less

I've been doing some research along these same lines and prices....it appears that the 597ci HD DI is a pretty good unit for the money. Altho it may be that what I'm looking for is different from what you want. I need the GPS capability, the ability to mark wp's and tracks, and I want to have the DI...can't afford to go with multiple units at this time, so the "quick disconnect" appeals to me, also.