Reply With QuoteYou don't need to add NMEA2000 for this function. It can be done via Ethernet.
Refer last pages of this pdf for applications..
http://primus.lowrance.com/icr/units/HDS System Overview.pdf
PS
It works just fine.
Likes: 0
Thanks: 0
HaHa: 0
Crappie.com Legend
HDS networking question
Is this what I need to simply link two HDS units together for waypoint and transducer sharing. Will also have an LSS-1 in the mix as well. Or is there a simpler solution. I was thinking there was a simpler way with just a cable that plugged directly into the back of each unit, but didn't see it on the Lowrance site.
NMEA Starter Kit 124-69 Network starter kit. Includes 2 terminating resistors (TR-120M-RD, TR-120F-RD), two T-connectors (N2K-T-RD), one 2 ft extension cable (N2KEXT-2RD), and one 15 ft extension cable (N2KEXT-15RD), and a power node (N2K-PWR-RD). For use with all Red network devices. $49.95 $49.95
Wannabe...v2.0
A lot like the old Wannabe... except with fewer bad words. And Karate chop action. But, yes, still purtier than you.
Crappie.com 2011 Man of the Year
* Crappie.com Supporter
You don't need to add NMEA2000 for this function. It can be done via Ethernet.
Refer last pages of this pdf for applications..
http://primus.lowrance.com/icr/units/HDS System Overview.pdf
PS
It works just fine.
Member BS Pro-Staff and Billbob Pro-Staff
Proud Member of Team Geezer... authorized by: billbob and "G"
Crappie.com 2011 Man of the Year
* Crappie.com Supporter
Just in case, here is good article about NMEA2000 buss installs. Pictures.Hands ClappingHands Clapping
http://www.uprealimager.com/interest...ndamentals.pdf
I have the NMEA2000 network end powered. Needed the NMEA2000 network for external antenna 4000 and also for Yamaha engine instrumentation. Was it worth it? Not sure yet.
If you install NMEA2000, be sure to put the network terminators in positions as described.Doh Some stuff will not function just rite.
PS
Just erase the Garmin logo and write in Lowrance. It will then work.
PS#2
I know what not "to do" also.
Last edited by Cane Pole; 06-27-2011 at 09:40 PM.
Member BS Pro-Staff and Billbob Pro-Staff
Proud Member of Team Geezer... authorized by: billbob and "G"
Crappie.com Legend
Thanks CP. Ethernet is what I want and needed. That NMEA backbone looks like it could get expensive pretty quick with all the T connectors and Terminators and what not. Sure would be handy to be able to have real time fuel flow for optimum fuel burn these days though.
Wannabe...
Wannabe...v2.0
A lot like the old Wannabe... except with fewer bad words. And Karate chop action. But, yes, still purtier than you.
Crappie.com 1K Star General
I have two HDS8's linked by Ethernet---works great.
Crappie.com 2011 Man of the Year
* Crappie.com Supporter
NMEA2000 steup is expensive. I got most of my stuff from Cabela's bargain cave after Christmas sale. Got the stuff at half price, but I still feel like I was bent over a stump at the so called reduced prices.
Member BS Pro-Staff and Billbob Pro-Staff
Proud Member of Team Geezer... authorized by: billbob and "G"
Posting Permissions
