Thread: 788 depth problem

The second bottom is a reflection as you are in such shallow water. Try reducing the sensitivity and that should clean things up. I'm still learning mine.

Kb

Originally Posted by kb2112

The second bottom is a reflection as you are in such shallow water. Try reducing the sensitivity and that should clean things up. I'm still learning mine.

Kb

I agree 100% I have the 778c and had to do the same thing.

Thanks guys I will give it a try.

We have just released software for shallow water issue. Go to Humminbird.com and download the latest software.

My 788ci did not start showing the two bottoms in shallow water until I did the update. It does not bother me. That is the way my old fish finder worked. Is there a way to set the bottom of the screen so it will always stay on say 40 ft. I cut auto depth off but the bottom of the screen will still jump up and down when I go from deep to shallow. I would like the bottom of the screen to stay at 40 ft. Thanks for the help.

Well I turned sens. down to 1 and no help, have tried all I know still same problem.

Sometimes you need to find a balance between the sensitivity and the surface clutter settings. I find that I have to do this each time I go out as the water conditions change from lake to lake, or even from area to area on the same lake.

CAPP,
Did you try loading the latest 4.960 software?
The Sensitivity adjustment will not help the unit track the correct bottom reading on our units but at those water depths you can try adjusting the Surface Clutter menu which may help.