Likes Likes:  0
Thanks Thanks:  0
HaHa HaHa:  0
Page 1 of 2 12 LastLast
Results 1 to 10 of 15

Thread: Sizing TM Batteries

  1. #1
    Join Date
    Jul 2009
    Location
    Madison, Alabama
    Posts
    1,232
    Post Thanks / Like

    Default Sizing TM Batteries


    I've got a new TM coming.

    Are there any sizing calculations or rules of thumb on what sized Amp-Hour batteries that I should be looking for?

    What size batteries do you use for 80# thrust TMs?

    Thanks,
    Team "Itch N 2 Fish"

  2. #2
    Join Date
    May 2004
    Location
    Gloucester, VA
    Posts
    4,903
    Post Thanks / Like

    Default

    A pair of good quality group 27 batteries is the minimum you want IMHO.
    Keith
    2008 NWR Bash Crappie Champion
    2010 NWR Bash Yellow Perch Champion
    2010 Buggs Bash Smallest Crappie Award

  3. #3
    Join Date
    Jul 2009
    Location
    Madison, Alabama
    Posts
    1,232
    Post Thanks / Like

    Default

    Thanks, PanMan

    I had heard Group 27 before, Just didn't know that was related to Amp-Hours.
    Team "Itch N 2 Fish"

  4. #4
    Join Date
    Oct 2009
    Location
    Indiana
    Posts
    902
    Post Thanks / Like

    Default

    I would seriously look at the 30 or 31 group. You will always have power all day with them.
    I have always used AC Delco, and was just looking and this set are 5 years old and still run all day with no problem. But I think I will change them next month to be on the safe side.

  5. #5
    Join Date
    Jul 2009
    Location
    Madison, Alabama
    Posts
    1,232
    Post Thanks / Like

    Default

    Quote Originally Posted by brushnjigs View Post
    I would seriously look at the 30 or 31 group. You will always have power all day with them.
    I have always used AC Delco, and was just looking and this set are 5 years old and still run all day with no problem. But I think I will change them next month to be on the safe side.
    Thanks for the info. I got a copy of the manual from the vendor. It says at least a 115 AH battery.

    According to this link ( Deep Cycle Battery FAQ ), that would be a Group 31 battery.

    Thanks
    Team "Itch N 2 Fish"

  6. #6
    Join Date
    Jan 2007
    Location
    Grenada, MS
    Posts
    18,942
    Post Thanks / Like

    Default

    There is one rule for batteries: Get the biggest dang ones you can shoe horn into the space and consider adding more space.

    Wannabe...
    Wannabe...v2.0
    A lot like the old Wannabe... except with fewer bad words. And Karate chop action. But, yes, still purtier than you.


  7. #7
    Barnacle Bill's Avatar
    Barnacle Bill is offline Super Mod and 2014 Crappie.com Man of the Year * Crappie.com Supporter
    Join Date
    Apr 2004
    Location
    Chesapeake, Va
    Posts
    20,251
    Post Thanks / Like

    Default

    That is a good link and as it tells you deep cycle batteries are rated in amp hours. This is the figure you want to look closely at. As you know an 80 lb motor is a 24V system and requires 2 batteries. Ideally you want 2 identical batteries (age, size, type and make). Any 2 deep cycle batteries will work. However the smaller they are in amp hours, the less time you will have for trolling. General rule of the thumb is get the biggest (amp hour) that will fit and you can afford. You never know when the fish will turn on big time and you just don't want to have to quit because you run out of trolling power. Also remember the most important things you can do to prolong their life is keep fluid levels up, keep connections clean and tight, and RECHARGE ASAP after EVERY use.
    Fair Winds and Following Seas

    Bill H. PTC USN Ret
    Chesapeake, Va


  8. #8
    Cane Pole's Avatar
    Cane Pole is offline Crappie.com 2011 Man of the Year * Crappie.com Supporter
    Join Date
    May 2004
    Location
    Pumphouse Tn.
    Posts
    23,940
    Post Thanks / Like

    Default

    Quote Originally Posted by IBNFSHN View Post
    That is a good link and as it tells you deep cycle batteries are rated in amp hours. This is the figure you want to look closely at. As you know an 80 lb motor is a 24V system and requires 2 batteries. Ideally you want 2 identical batteries (age, size, type and make). Any 2 deep cycle batteries will work. However the smaller they are in amp hours, the less time you will have for trolling. General rule of the thumb is get the biggest (amp hour) that will fit and you can afford. You never know when the fish will turn on big time and you just don't want to have to quit because you run out of trolling power. Also remember the most important things you can do to prolong their life is keep fluid levels up, keep connections clean and tight, and RECHARGE ASAP after EVERY use.
    AMEN and AMEN.
    Member BS Pro-Staff and Billbob Pro-Staff
    Proud Member of Team Geezer... authorized by: billbob and "G"

  9. #9
    "G"'s Avatar
    "G" is offline Super Duper Moderator - 2012 Crappie.Com Man of the year & 2018 Crappie.com Decade of Exceptional Service Awards * Crappie.com Supporter * Member Sponsor
    Join Date
    Aug 2008
    Location
    Belden, MS
    Posts
    94,306
    Post Thanks / Like

    Default

    Quote Originally Posted by IBNFSHN View Post
    That is a good link and as it tells you deep cycle batteries are rated in amp hours. This is the figure you want to look closely at. As you know an 80 lb motor is a 24V system and requires 2 batteries. Ideally you want 2 identical batteries (age, size, type and make). Any 2 deep cycle batteries will work. However the smaller they are in amp hours, the less time you will have for trolling. General rule of the thumb is get the biggest (amp hour) that will fit and you can afford. You never know when the fish will turn on big time and you just don't want to have to quit because you run out of trolling power. Also remember the most important things you can do to prolong their life is keep fluid levels up, keep connections clean and tight, and RECHARGE ASAP after EVERY use.
    Your exactly right!
    I have spent most my life fishing........the rest I wasted.
    PROUD MEMBER OF TEAM GEEZER
    PICO Lures Field Rep

  10. #10
    CatFan's Avatar
    CatFan is offline Crappie.com 2K Star General * Crappie.com Supporter
    Join Date
    Jun 2004
    Location
    SW Indiana
    Posts
    2,777
    Post Thanks / Like

    Default

    RC is a hair more useful for TM applications since it's measured at a current draw that's more similar to TM use than the ones that are used for AH. A typical Group 27 will have around 180 minutes RC, and a big dog like the Trojan SC225 is 225 minutes RC, and the Everstart Maxx 205-210 minutes.

Page 1 of 2 12 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

BACK TO TOP