Reply With Quotethat's one of those deal's a person would have to say,,,,,,now why didnt i think of that,,,,thanks cp
Likes: 0
Thanks: 0
HaHa: 0
Crappie.com 2011 Man of the Year
* Crappie.com Supporter
V-Lock mounting system
Interesting concept.
V-Lock Universal Mounting System | Quick Release & Lock for Boats and Recreation
Member BS Pro-Staff and Billbob Pro-Staff
Proud Member of Team Geezer... authorized by: billbob and "G"
Crappie.com Legend
that's one of those deal's a person would have to say,,,,,,now why didnt i think of that,,,,thanks cp
IT'S 5--O-CLOCK SOMEWHERE,,,MIKE-p
PROUD MEMBER OF TEAM GEEZER
Crappie.com Legend
Nice system!
RIP Frank - Crystal is now posting on his behalf.
looks like it would work
PROUD MEMBER OF TEAM GEEZER
Crappie.com Legend - 2013 Guber Of The Year
* Crappie.com Supporter
slick
PROUD MEMBER OF TEAM GEEZER
Crappie.com Pro Staff
Guber Pro Staff
Cane Pole Pro Staff
Haulin Ash Pro Staff
Crappie Wall Hanger II
Thank you for bring that to my attention. Calling them Monday to see if 2 of them side by side would be strong enough to support a 28lb. 2hp kicker motor for my pontoon. Sure would be a slick quick detach.
"Hello, My name is Bill, and I'm a tackleholic"
Super Moderator
* Crappie.com Supporter
Another idea for mounting a sodium light. Thx.
Minnow
* Crappie.com Supporter * Member Sponsor
Thanks to all for the comments. This is a new product and I welcome any feedback and constructive criticism.
boatstall: I sold one on Monday at the Miami Boat show to a sailboater who is going to put a 5hp motor on it. He said it was only for emergency use but the V-Lock in that location might be useful for other applications. He is bolting it through and using a backing plate so it should be fine.
One key recommendation I have (and I need to add to the website) is that if you are using an application that causes a lot of vibration, take the spring loaded pull pin out and get a 3/8-16 threaded hex cap screw (at most any hardware store) so you can really get it in tight. Also you need to first bolt a wider and thicker block of wood or starboard to the insert to accommodate the motor.
The pull pin is good for most applications to keep stuff from popping out (and losing them in the water), but is not meant for securing something like a motor.
Michael Rowan
V-Lock Universal Mounting Systems
Posting Permissions
