Boat Rigging Thread.

[RCC]

Had several things to happen scheduled and unscheduled to prevent work on the boat till late this evening. Had a little while left today so I thought I would try to finish the transducer mount. I wanted to put rubber mat behind the aluminum to fill the gap between the mount and the boat, but things did not work out, so I used a piece of cutting board which I ground to shape then drilled, tapped, and fastened to the aluminum mount with #8 machine screws. This whole assembly has now been plasti-dipped and is hanging out to dry. Hopefully this will happen before the rain gets here. The screw holes for the transducer have already been drilled and tapped for #8 machine screws as well.

Attachment 131863