Water pump

**Gindog** · 11-11-2012, 02:22 PM

Where the best place to have a water pump put in a old 1994 25hp evinrudge. I think mine has went out. Water is not coming out squirt tube. And it not letting water come out block either.

**Cray** · 11-11-2012, 02:35 PM

Have you checked to make sure P hole is clear? Pull cowl and remove rubber hose to discharge at side of motor, run small wire through to make sure it is clear and blow through hose to make sure it is clear. If you have muffs or barrel try running with hose disconnected to see if it really isn't pumping.

**creekslick** · 11-11-2012, 02:41 PM

They are not hard to change out your self.

**Gindog** · 11-11-2012, 02:47 PM

Originally Posted by cray

Have you checked to make sure P hole is clear? Pull cowl and remove rubber hose to discharge at side of motor, run small wire through to make sure it is clear and blow through hose to make sure it is clear. If you have muffs or barrel try running with hose disconnected to see if it really isn't pumping.

I have done all that with no water running out if motor.

**Gindog** · 11-11-2012, 03:05 PM

Creekstick I not to sure i know how to do it. I sure mess up with out some help with it.

**Lkconwayguru** · 11-11-2012, 06:54 PM

Gindog check your pm box

**monkeywrench** · 11-11-2012, 07:47 PM

If you are in the Conway aera Stan Dickerson at Dickerson Marine just north of Wooster will do a good job.

**supergooser** · 11-11-2012, 08:10 PM

harrisons devalls bluff does all my work

**arkansasbowhunter** · 11-11-2012, 08:28 PM

Google it on u tube save yourself money. They are easy to do and with the video help a no brainer

Jigaholic Prostaff
B an M PST
Hi-Tek rod holders
Xpress Crappie Edition
Lowrance HDS 8 an 10

**Gindog** · 11-11-2012, 10:05 PM

I did not think about that. It look easy to do on the videos I may try to take it on. Thanks

Thread: Water pump

Thread Tools

Display

Water pump

Posting Permissions