Likes Likes:  0
Thanks Thanks:  0
HaHa HaHa:  0
Page 2 of 3 FirstFirst 123 LastLast
Results 11 to 20 of 22

Thread: How in the Heck...

  1. #11
    Join Date
    Jan 2012
    Location
    Arkansas
    Posts
    145
    Post Thanks / Like

    Default


    I use a 1/16th slide weight ahead of jig.It gets deep fast plus when you get hung up just jiggle rod tip and weight will knock jig loose.

  2. #12
    Join Date
    Jan 2012
    Location
    Arkansas
    Posts
    781
    Post Thanks / Like

    Default

    Quote Originally Posted by luvpt View Post
    Right now at lake Monticello I'll fish 50 ft deep (give or take a few feet) with 1/16 oz jigs. I normally put out eight rods (16 footers) that are usually the sensitive Capps & Colemans because of the very light bite. Might cover 50 feet in an hour....need to be on top of the fish before dropping the jigs and use markers for reference........
    We've bass fished lake Monticello but I've never seen 50' water on that shallow lake??

  3. #13
    Join Date
    Aug 2008
    Location
    Monticello, AR
    Posts
    1,662
    Post Thanks / Like

    Default

    Quote Originally Posted by constructskeeter View Post
    We've bass fished lake Monticello but I've never seen 50' water on that shallow lake??
    If your Crappie fishing Lake Monticello this time of year be sure you have plenty of line (some fishermen have had to re-rig before being able to fish). I've never heard LM referred to as a shallow lake....that's a new one for me! Even in the summer we usually are fishing for Crappie 14 ft deep in 20-30 FOW. The deepest area I have personally seen on the lake was a hole out from the Hunger Run boatramp that was 64 ft. There was another hole SW of the spillway pipe that showed 61 ft last winter and was slap full of fish! I think the main body of the lake averages between 35-50 FOW. It's down quite a bit right now but still deep compared to most other lakes in this area. This time of year it's ultra slow-trolling at it's best!

  4. #14
    Join Date
    Feb 2010
    Location
    Arkansas
    Posts
    23,375
    Post Thanks / Like

    Default

    I use a 16' pole, so I let my line out 11/2 times the pole length. Weight depends on conditions. I use a 1/2oz with minners or jigs usually. Have gone up to 4oz tho when moving faster.


    BRM
    We only sell the Best. Ranger, Xpress, Yamaha, Suzuki, Tohatsu.

  5. #15
    Join Date
    May 2005
    Location
    Grenada Lake, Ms / Cherokee Village, Ar
    Posts
    2,961
    Post Thanks / Like

    Default

    Just put a 1/2oz. barrle weight between the two jigs, or on the very bottom of your line.
    That way it gets down fast and you can feel the bottom good. Before you drop your line in the water, turn your reel handle one full turn and see how many inches it comes up, that way you know for sure what one turn is.
    About the barrle weight... if you put it between the two jigs, just loop the line thru the hole in the barrle weight about three or four times, and it will stay in place.
    The reason of putting the weight in the middle of your jigs, is fishing that deep and you get hung up, don't set the hook in the brush hard cause the weight in the middle can knock the hook loose by bouncing it up and down directly over the hang up ...most times.
    crappie cowboy

  6. #16
    Join Date
    May 2005
    Location
    Grenada Lake, Ms / Cherokee Village, Ar
    Posts
    2,961
    Post Thanks / Like

    Default

    I've got a 3 3/4 pound crappie on the wall that a soda pop can will fit in his mouth.
    I've caught a crappie before that had tried to swallow a shad and it hung in it's mouth and I could see it's tail inside it's mouth.
    I like a 1/8 and 1/4 oz. jig with a big hook, I get hung more, but the hook up ratio on the crappie is much better.
    I'm with xring on big bait big fish theory.
    crappie cowboy

  7. #17
    Join Date
    Sep 2011
    Location
    Dardanelle, Arkansas
    Posts
    979
    Post Thanks / Like

    Default

    Quote Originally Posted by luvpt View Post
    Right now at lake Monticello I'll fish 50 ft deep (give or take a few feet) with 1/16 oz jigs. I normally put out eight rods (16 footers) that are usually the sensitive Capps & Colemans because of the very light bite. Might cover 50 feet in an hour....need to be on top of the fish before dropping the jigs and use markers for reference........
    What weight line are you useing? And are you putting out 50 ft. of line,,or are you fishing 50 ft. deep? I can get a 1/8 oz jig down to 30 feet, unless the wind is blowing,,the damn is not generating too much water that causes a current, or shutting off generators can cause a upstream current...and when I hook a fish useing 1/8 oz., he may be 30 feet behind my boat..I cannot even imagine trying to fish 50 feet deep with a 1/16 oz jig.

  8. #18
    Join Date
    Jul 2010
    Location
    Jonesboro, AR
    Posts
    2,992
    Post Thanks / Like

    Default

    Hey xring - I fished 2 lakes today this weekend and never saw water deeper than 8'. I use 8 lb trilene big game green. I still plan on coming down to fish with you.
    MEATGETTER JIGS PRO STAFF
    Hand Tied and Built to Last
    "The best jig is the one they are biting - Meatgetter Jigs" BillyE


  9. #19
    Join Date
    Sep 2011
    Location
    Dardanelle, Arkansas
    Posts
    979
    Post Thanks / Like

    Default

    Quote Originally Posted by Billy E View Post
    Hey xring - I fished 2 lakes today this weekend and never saw water deeper than 8'. I use 8 lb trilene big game green. I still plan on coming down to fish with you.
    Get yo'self down here...crappuie are hongry...

  10. #20
    Join Date
    Aug 2008
    Location
    Monticello, AR
    Posts
    1,662
    Post Thanks / Like

    Default

    It just takes a little practice. We use 6# line with a 1/2 oz weight 18-24 inches above a single 1/16 oz jig. Bobby Garland baby shad is our first choice in vegas, chart/red glitter, nat cricket, elec chicken, blue thunder, ect. Also the Mo'Glo works good in the Ghastly Minnow and Pink Phantom. We find the fish with DF and drop a marker....Then we put out the lines...Throw them out about 40 ft or so away from the boat and let them swing down to keep jig from tangling with the weight. When it is straight down we slowly lower it to the bottom then pick it up a couple of cranks and put the rod in the holder. Takes a little time to get all the rods set up and fishing. Most of the time we are trying to keep all eight lines as vertical as possible while watching for an extremely light bite. They are lazy right now and you have to put that jig right in front of their eyes and tease them for a while before they will take it. This time of year the LM crappie will suck that jig in for a taste and spit it back out before you can even see the bite. Many times a fishermen who is not having any luck on LM is just not paying enough attention to the rod tips and is not detecting that bite! I have not had any luck with anything larger than 1/16 and sometimes even go to a 1/32. We try to stay right on top of the fish and usually stay inside of an area the size of an acre. If you catch'em just right LM can produce gigantic black specks that are as large as any I've seen anywhere. Blue Thunder and myself caught 14 thick slabs one morning that ran from a small of 17 inches up to 19.25 inches. The battery was down on the scales so we didn't get to weigh any of them before they got cleaned! Granted, that was a few years ago but we still catch an occasional headturner!

Page 2 of 3 FirstFirst 123 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

BACK TO TOP