HaHa HaHa:  0
Results 1 to 10 of 11

Thread: Rod lure weight rating ?

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Join Date
    Jan 2007
    Location
    Maryland
    Posts
    742
    Post Thanks / Like

    Default

    Quote Originally Posted by gillchaser999 View Post
    Adding to this , I’ve found that shorter moderate action rods are better for casting light lures , even though they are rated for 1/16oz and up .
    I’m not talking about slow action rods .
    I have a xxul “ fast “ action rod that will not load and cast lighter lures .

    I just picked up a TCB65 and can't believe the casting distance. I tied on a #6 jig hook and crimped the tiniest splitshot I had (got to be under 1/64) Put a little shad bait on it and 60' plus on first cast. WAY further then with that 6'3 Abu mass beat.

  2. #2
    Join Date
    Mar 2010
    Location
    Georgia; South of the big A
    Posts
    3,731
    Post Thanks / Like

    Default

    Quote Originally Posted by MDCrappie View Post
    I just picked up a TCB65 and can't believe the casting distance. I tied on a #6 jig hook and crimped the tiniest splitshot I had (got to be under 1/64) Put a little shad bait on it and 60' plus on first cast. WAY further then with that 6'3 Abu mass beat.
    Congrats !
    I own a couple of those .
    First trip out the tip snapped.
    The tip was replaced with warranty and I purchased a backup tip .
    I probably should fish them more , but I’m enjoying my under 6’ rods too much right now .
    Actually, most of the rods I’ve been using are under 5’6” . Most are between 4’6” and 5’3” .
    My AB MB3’s are just sitting in the rod rack .
    So many factors involved in casting distance.
    “ The bigger the Bend , the Wider the Grin ! “

  3. #3
    Join Date
    Apr 2018
    Location
    Ohio
    Posts
    43
    Post Thanks / Like

    Default

    Baffled? Me too. I own three Okuma SST New Generation Trout spinning rods, 5'6 6'0 6'6. All are rated as moderate action and UL power. The 5'6 is rated for 1/16-3/8 and the 6'0 - 6'6 are rated for 1/8-3/8. For me they provide reasonable distance with 1/48 to 1/24 and all the sensitivity I need for fishing relatively shallow water. To me casting a 3/8 jig on any of these would be like lobbing a shot put, aside from risk to the rod by exceeding its practical use.

    These are my favorite panfish and crappie rods, bought on the recommendation of a trout angler from another site and watching him actually fish the 5'6 with UL trout jigs.

    Were it up to me I would rate them at 1/32 to 1/16 (1/8 at the most but that's pushing it).

    It seems the rods would be more popular and sell better if they were rated properly.

    Just my two cents.
    Thanks gillchaser999 thanked you for this post

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

BACK TO TOP