Thanks: 
HaHa: 
Reply With QuotePictured below is what I'm trying to replicate. It's actually a motorized diy project but I plan to build as a manual twist pole that will raise and lower with the trolling motor.
Sent from my SM-S215DL using Tapatalk
Crappie Wall Hanger II
Mega 360 mount bracket thickness
I'm thinking about trying to build an independent mount for my mega live to go on my ultrex using the same mount/bracket that the 360 uses. I have a template to cut out from aluminum but wasn't sure what the thickness was, whether it's 1/4 or 3/8. I have looked at just buying the mount/bracket but haven't had any luck. Would anyone either have the thickness or a place to just buy the mount?
Sent from my SM-S215DL using Tapatalk
Crappie Wall Hanger II
Pictured below is what I'm trying to replicate. It's actually a motorized diy project but I plan to build as a manual twist pole that will raise and lower with the trolling motor.
Sent from my SM-S215DL using Tapatalk
Crappie.com Legend - 2017 Man Of The Year
I used 1/4
Sent from my iPhone using Crappie.com
Proud Member of Team Geezer!Hanr3 LIKED above post
Crappie Wall Hanger II
Pm sentOriginally Posted by Redge
I used 1/4
Sent from my iPhone using Crappie.com
Sent from my SM-S215DL using Tapatalk
Crappie.com Legend - 2017 Man Of The Year
Mega 360 mount bracket thickness
Pm answered
Sent from my iPhone using Crappie.com
Proud Member of Team Geezer!
Crappie.com 2016 Man of the Year
* Member Sponsor
The HB 360 Ultrex bracket kit is a pretty expensive item ...
https://humminbird.johnsonoutdoors.c...0-hardware-kit
Of course it has both pieces of the bracket where you may only need the flat plate for your application ...
Rickie
www.podunkideas.com <--Click here
------------
https://www.crappie-gills-n-more.com/
https://cornfieldfishinggear.com/
------------------------>> Pro Staff Sonar Advisor
Crappie Wall Hanger II
I plan to purchase .25 steel plate to build the bracket from. I'd rather do aluminum for longevity but I don't have the ability to weld it. I'll most likely have to weld in a section of 1.25 pipe and an angle brace of some kind. I did notice the price of humminbird bracket and that's why I plan to diy it. It's very pricey for what it is.
Sent from my SM-S215DL using Tapatalk
Crappie.com Legend - 2017 Man Of The Year
Thats why I did my own. To expensive for what it is.
Sent from my iPhone using Crappie.com
Proud Member of Team Geezer!
