Thread: Onix patch 2.720

ONIX/ION PATCH (Version 2.720)
Release Date: 06/02/2016

Description:
Models Affected:
· All ONIX CT and NT versions
· All ION

NOTES:
· The version 2.720 patch will only install successfully after software version 2.700 has been installed. If this patch is installed on older versions of software, the installation will fail, but will not harm pre-2.700 software installs
· There is no reason to install the patch more than once but doing so will not damage the unit
· The patch takes approximately 30 seconds to install. The unit will reboot automatically once the installation is complete.
· The patch does not update the version number. The version number will remain at 2.700 after the patch is installed.

Resolved Issues:
· Fixed an issue causing Side Imaging and potentially Down Imaging data to appear incorrectly.
· Fixed an issue where Restoring Sonar Defaults could cause 360 Imaging Range to be permanently set to 6 ft.

Prerequisite:
You will need:

working SD reader/writer device
attached to your PC and
a formatted SD card (minimum size 4GB, class 6, maximum 32GB)

Instructions:
For detailed instructions with images, please see our FAQ on this topic.

Once you are ready to start the download process scroll to the bottom of this dialogue box and click on Download. You can also print the instructions from this section.

The name of the software file will typically read similar to unified-app-rX.XXX.pkg or unified-firmware-xx-xxxxxxx.pkg . (With x being a series of numbers or letters depending on the accessory or software version this software relates to.) Unless you are previously instructed to do so in the description of this download above, DO NOT rename the file and do not try to open the file. This file is only meant to be saved. Depending on your computer's operating system, the next steps can be quite different from computer to computer. The most important steps are to save the file onto an SD card for use on your unit.

Once you have the software update on the SD card, you would then power on your ONIX unit and go to your Home Screen by either pressing the home button, or the two finger swipe down the screen.From the home page you would swipe the lower widgets across the bottom of your home page until you get to Files Widget and then tap the Files Widget.
You are then at the Files Menu and Software Update is highlighted with a gold box. Place the SD card with the software update into your ONIX unit.
Then select Install Now. DO NOT remove the SD card until the software update is complete.

The unit will power down and automatically restart.

Rickie

got any screenshots kosmo?

Originally Posted by skigill

got any screenshots kosmo?

Here's some pictures. All have the medium / high chirp running. I'm still not a big fan of Onix si, but the overall unit is much better than my 998...[URL=http://s826.photobucket.com/user/kosmo012/media/Mobile%20Uploads/snp0608161720_zpswbvymfra.jpg.html][/URL]

KOMOS,LOOKS GOOD,ON THOSE ROUND OBJECTS YOU HAD SPEED AND UNIT SPEED RIGHT

si looks good to me!

Originally Posted by genec

KOMOS,LOOKS GOOD,ON THOSE ROUND OBJECTS YOU HAD SPEED AND UNIT SPEED RIGHT

Those two pictures, showing the coffer dam are with the trolling motor running fast enough, to keep the trolling motor straight while the outboard is running.