Name: 0411150946-01.jpg Views: 1203 Size: 35.5 KBName: 0411150946-00.jpg Views: 651 Size: 33.5 KB

Ok guys I can eliminate two of your concerns. 1. When I moved the LSS2 to the adjustable bracket I can extend it down several inches under the boat. In the bottom picture for example it is about 2 inches below the hull of the boat.
2. When I am scanning intently in one area I tilt the motor up as shown so the OB motor is not interfering with the signal.

So, that leaves the settings as a question. I will try different settings and adjustments. I have not had much time to spend on the water with it so far, but I will be at Santee for a week shortly so I hope to explore all options with it and will post results.

The question of range out to the side still is unanswered. I am told it will scan out only to 3 times the depth and also told it will go out 100 feet or more. One of the things I had wanted to try at Santee was looking for bream beds. Most of the water we fish is 8 feet or less so I sure hope I can read out more than 24 feet looking for beds. We will see.
One problem I have is no internet access while I am down there so I will have to wait until I get back to post results and questions unless I can find a hotspot that will let me get out.

Thanks for all the input. Hope I can make some progress soon.