Thread: Terrova SI Issue Bums Me Out!

Originally Posted by "G"

Most folks silicone the si cable in the grove on the shaft.......there are some utube videos that show exactly how to do it

x4!

Originally Posted by Redge

x4!

X5. I just ran mine through the shaft today. Silicone drying. Go to YouTube, search for Doug Vahrenberg trolling motor transducer mount. Phish video will walk you through the entire process.

Update. I finished up this morning with the install. A word of caution, in addition to the RTV silicone in the groove, I used electrical tape and taped the transducer cable to the shaft. I would not recommend doing this, when you reinsert the shaft through the mount, it won't go, too tight. After I got everything back together, I used a pull tie to secure the cable to the shaft, top and bottom, then wrapped some electrical tape around the shaft to keep from pinching the cable. Just as a precaution. Now we'll see how it all works!!!