Thread: LSS 2 transducer

Originally Posted by Big Guy

Just not sure if I would have enough clearance for the Lss-2. I guess my question should be how much clearance is needed for the lss2?

Lowrance recommends that the LSS transducers be mounted 12-18 inches from motor when mounted on transom. I think this should give you plenty of clearance from the motor. There is a video on the Lowrance page that demonstrates how to position the Transducers of structure scan. Hope this helps ya, good luck. Video Library - LOWRANCE | Marine Electronics

Thanks for the video link! Are most of you just trimming your motor up while scanning. The clearance I am talking about is not my motor hitting the transducer, but my motor blocking the signal from side to side of the transducer. Seems like a jackplate or just trimming up will work. Thanks for all pics and responses.
BIG GUY