Need help on Garmin Fishfinder

I have a 93 SV UHD fish finder that I can’t figure out a problem I am having. On the screen it comes up Sonar Recording transducer not found. I know transducer is connected. I don’t know if I selected something accidentally but I can’t get it to go off. Any suggestions. I have put a picture below. Thanks in advance. Attachment 487476


Sent from my iPad using Crappie.com

There should be a tag near the plug of the transducer. Go in the menus and find transducer selection and be sure the correct transducer I’d is selected.

As far as recording thing I haven’t ever seen that. Is this a new unit?

What transducer do you have? If LS maybe you have selected the wrong one

Check all your connections. I’ve had a bad connection before that I believe gave a message like that.

Mine did that yesterday for the first time. Take it out of the cradle relock back in cradle and turn it back on fixed mine. A friend had that problem and ended up replacing the cradle because it had a bad plug.

Sent from my moto g(7) power using Crappie.com Fishing mobile app

theysaid If problem is still there, call Garmin customer support. They have successfully assisted me with issues in the past. Good luck!

Quote:

---

Originally Posted by lowe rider

There should be a tag near the plug of the transducer. Go in the menus and find transducer selection and be sure the correct transducer I’d is selected.

As far as recording thing I haven’t ever seen that. Is this a new unit?

---

I have had it about 4 years and this is first time I have seen this and it did it a few days ago. I think it is reading the right transducer but I’ll check that out. Thanks


Sent from my iPad using Crappie.com

Quote:

---

Originally Posted by Grumpa

What transducer do you have? If LS maybe you have selected the wrong one

---

It is a GT 54 and no live scope connected to it. It stands alone now. I have had it networked to another unit but it is not now. Thanks


Sent from my iPad using Crappie.com

Quote:

---

Originally Posted by SuperDave336

Check all your connections. I’ve had a bad connection before that I believe gave a message like that.

---

I think the connections are ok. I forgot to mention this only happens when it is on simulator. I was putting it in simulator to try some different settings and this popped up. Thanks


Sent from my iPad using Crappie.com

Quote:

---

Originally Posted by skeeter96

Mine did that yesterday for the first time. Take it out of the cradle relock back in cradle and turn it back on fixed mine. A friend had that problem and ended up replacing the cradle because it had a bad plug.

Sent from my moto g(7) power using Crappie.com Fishing mobile app

---

Tried that and it didn’t change anything. I just used it on lake Thursday just find. This just comes up in simulator mode. Thanks


Sent from my iPad using Crappie.com

Quote:

---

Originally Posted by Retired2Fish

theysaid If problem is still there, call Garmin customer support. They have successfully assisted me with issues in the past. Good luck!

---

Thanks my plan this week if I can’t figure it out. Thanks


Sent from my iPad using Crappie.com