Printable View
Hi fellows,
I want to set up a T-bar type rod holder system on the front of my 14 foot jon boat for tight lining (spider rigging).
What brand and set up do y'all like that is affordable and durable. I want the potential to use eight rods. I am sitting down in the boat not on top of it "bass style", so I don't need a real tall set up.
Thanks so much
If you want, check out hi tek as I have them front and back on my g3 1648 jon.
Home
Scott will make and modify them any way you want. Just contact him. Good luck in your choice.
Millennium Spyderlok’s are in my opinion the only way to go. They don’t have an 8 pole option though, so you’d have to have two, four pole holders. That’s what I do on my boat. They have 3 different height adjustments. I’ve got a low deck aluminum boat, and they’re not too tall for me.
Sent from my iPhone using Crappie.com Fishing mobile app
I have enough Hi-Teks for my boat to put out 19 rods, so you might say I'm kinda partial. Small father and son business and no better customer service anywhere. I have 4 18" posts and another for midway in the boat that is 9" if I remember right. Special applications that I have seen done were top notch. They may not be the cheapest but I have never had to do anything with mine but figure out where I wanted to use them that day and go to it. If you buy before looking into these you would be doing yourself a disservice. The extreme version has high sides and I have had 10lb catfish hit my rods pointing 90* out the side of the boat and they don't come out of the holder. I'm sold.
Attachment 294821
I run Hi Tek as well and really like em!
DHC ... I don't know of any brand that has an 8 rod option (on one single T-bar stand), so you are correct that it would take 2 sets to have an 8 rod spread.
I'd like to see a pic of this boat, or an explanation as to how you intend to "sit down in it" and still reach the bow deck rod holders :scratchhead
since from what I've seen of the Big Jon ... there's two bench seats and a bow deck, and the bow deck is a good distance from the middle bench.
You might also want to keep your eye on the Personal Classifieds for a set of "gently used" rod holders, and save a little $$ ... that's where I bought my two sets of Hi-tek rod holders. :twocents
I assume he meant that he was going to put/or had a seat base in the floor of the boat (where the yellow circle is)and was intending to put his rod holders up on the front deck(where the green x is), which is why he didn’t need anything very tall. Attachment 294822Quote:
Originally Posted by CrappiePappy
Sent from my iPhone using Crappie.com Fishing mobile app
Possibly ... or maybe just a cooler with a padded top. :dono Hopefully he has a remote controlled trolling motor, or things are going to be a bit crowded up there !!Quote:
Originally Posted by DHC
This X2Quote:
Originally Posted by DHC
Millennium Spyderloks are what I have. You'll love em.
3 heights, adjust and remove easily with no tools needed.
You may have found the flaw in my plan that i hadn't thought about. My swivel seat is mounted on the middle bench seat, and there is some distance to the front bow deck. I had thought I would mount the T-bar base as far back on the front deck as i could toward the bench seat. I had planned on using 14' rods, so hoped the tips would still be out in front of the boat far enough to not spook the fish, when I was in shallower water. I have some nine and ten foot jig poles I use for jigging and hope that the 14s might have a little longer butt too. I imagine I will have to lean forward, while doing this technique, and doubt this will be my main way of fishing, because I love to have the rod in hand. Just have seen some friends do well with tight-lining with several rods and thought i would give it a try. I'm going to have to borrow a 14ft pole from a buddy and see if its going to be too far a reach...thanks for slowing my roll...till I know it will work for me.
This would have been a better idea, but my seat is mounted on the bench...going to do some more measuring and see if I can reach the holders, or whether I better stick with casting and vertical jigging like I have been doing. Thanks for the reply
Home made cost about $35.00.Attachment 294965Attachment 294966Quote:
Originally Posted by JimmyCricket
If I might be so bold as to offer a suggestion that might save the skin on a knuckle or two :Quote:
Originally Posted by The Fisherman
turn the bolts around and put the wingnuts "under" the crossbar.
I second the Hi Teks. I've had them on my last three boats and have always been satisfied with them.Quote:
Originally Posted by skeetbum
Driftmaster trolling racks might be an option ...
Trolling Systems and Accessories
-----
And there's Dub L Seat ...
https://dub-l-seat.com
Rickie
I have Hi-Tech but they did not come with the BIG knob for adjusting, I'm guessing that is something you added? Where would one find those at?
Quote:
Originally Posted by SlabSeeker0485
I bought mine online from McMaster-Carr : https://www.mcmaster.com/#catalog/124/2272/=1c2fipdQuote:
Originally Posted by Lonnie84
I have Hi-Tek rod holders, so I bought the studded knobs to fit it :
The big knobs I have under each rod holder are a (part number 2454K53 ) - 1/16"-18 x 1.5" threaded stud 2.5" diameter.
The small knobs I have on the top of the T-bar are a (part number 2454K67 ) - 5/16" - 18 x 1.5" threaded stud 1.75" diameter.
(as seen in this photo)
Attachment 295021
Quote:
Originally Posted by CrappiePappy
Thanks Pappy I'm going to do the same.
Look around on their website ... they have many different styles/sizes of knobs. If you set your holders and leave them, the knobs I chose would work fine. If you are constantly adjusting the holders (angle vs rod length) then a smaller knob or one with three lobes (& bigger lobes) might be a better option. Hand tightening them to the max depends on hand/wrist strength ... so I put a split lock washer on each knob to help hold them in place, since my 70yo hands/wrists don't have a whole lot of power left in them. :biggrinQuote:
Originally Posted by Lonnie84
Quote:
Originally Posted by CrappiePappy
I don't plan on adjusting much after I get them dialed in, I only have the 14ft rods that I use up front and some bass rods that go out of the back and on sides are just whatever get in there. With six sets of 4's and a couple extras thrown in I ended up with 26 of the large and 8 small, which ate $100. bill pretty quick. :crazy:Oh well if not here than somewhere else! :biggrin
Convenience and comfort costs $$ ... No doubt !!
Sent from my SAMSUNG-SM-J120A using Tapatalk
Attachment 295069 1648 War eagle
I've got these. I would buy again.
https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1