You guys can sure spend my money

After looking at how some of your boats were rigged today and Rees convincing me that the wife and I need to start gearing up for spider rigging sardis.

Here is my ideas on the gear.

Twin seat bracket from cumberland crappie. 180.00

poles crappie maxx signature 14'
6 240.00

hi tek rod holders 2@ 82.00 each
164.00
Reels: open face spinning
None chosen yet 25.00 x 6 each
150.00

This seems to be the bulk of the cost to start spider rigging for two.

734.00
That doesn't include shipping and applicable sales taxes, line, jigs etc.

So I think we will be single poling from different ends of the boat. We will start with the first crappie rods we bought. Zebco 10' crappie killer glass poles. They were 25.00 each and came with a little spinning reel. The only backbone seems to be in the handle.

We will need 2 minnow buckets. I want to do this right the first time so any preferances or reviews and suggestions would be appreciated.

As time goes by I will aquire the other stuff. If you have suggestions on the gear I've listed please let me know.

Y'all coached us from 0 to double limits in a matter of a few weeks trolling bandits. With the chill in the air those days seem short. Time to start dunkin minners and the like. Look forward to y'alls ideas and the like. ds

save 80 bucks and get the ez pole perch.

Quote:

---

Originally Posted by KDAVID1

save 80 bucks and get the ez pole perch.

---

I was just reading about the spyderlok t-bar and rod holders is that what you are refering to. Would much rather patronize member sponsers especially if I can save a few bucks.

oh no--you want the hi teks for sure--though the spyderlocks are nice too.
talking about the double seat set up--EZ Pole Perch--the guy is out of GA.
And why did Rees just now convince you to start spider rigging? I got pics from all summer:) jk
you'll love it for sure--and don't forget the drift socks--biggest one's you can get.

Gotch ya, will google that setup. Thanks !!

So what kind if minner bucket keeps them puppies alive for you over the long hot summer ?

I just use the Frabil 4.25 gallon one and put some ice in it-use the 12v plug in-will last for the day.
I also have the Frabil bait station--but it crapped out on me--won't spend that 80 bucks again:)

Hey those look like they could fit the bill. They look adjustable, which is a must.You are right 92.00+12.00 s&h.

Your boat sporting this setup?

Quote:

---

Originally Posted by downsouth

Gotch ya, will google that setup. Thanks !!

So what kind if minner bucket keeps them puppies alive for you over the long hot summer ?

---

48 quart cooler with aerator for the main storage.And transfer a few to standard 5 gallon bucket as needed.

I can give you a starters design you can get from lowes for bout $60-$80 for a 4 pole and 2, 2 pole
rod holders. You dont have to get any high dollar rod holders. Get you 6-8, a minimum of 12 foot rods. 14s are better and your good to go. I've caught just as many fish as anyone else using my cheap rig. The BGJP B&M poles are great and you can get a deal from a couple places likes Monks for buying multiple rods. The rods are more important than anything else. Rod holders just hold your rods in place

Quote:

---

Originally Posted by Big C

48 quart cooler with aerator for the main storage.And transfer a few to standard 5 gallon bucket as needed.

---

Wow, how many minners do you go thru fishing 6 poles on average ?

You have a pm downsouth.

Go to bass pro. Get you a styrefoam bucket liner to fit a 5 gal bucket 7.00. Get one of the small foam lined Minner buckets about 10.00. Spend the 45.00 for the dual 12 volt air pump. Go to Grizzly jig and get 8 Pinnacal Limit poles for 120.00. Some cheap reels to start. You can find some smaller Schimano rear drag reels for 8 to 12 dollars that are decent reels. Look at the dual seat set up that Grizzly sells. Spend the money up front and get HiTec rod holders.

Quote:

---

Originally Posted by Handicrappie

You have a pm downsouth.

---

Back at ya handi

listen to Handi--he knows what he's talking about

Cray where does the 12 volt supply come from, one of the 2 batteries from under my rear deck ? If so I guess I would have to wire a power point in the console. Which battery ? trolling motor or main motor ?

I looked at monks for the crappie maxx signature rods. Where I got the price from. I have handled them at bps and liked them. But for half the price the ones you suggested may be just as well. Anywhere around Olive Branch that I could put one in my hands.

Quote:

---

Originally Posted by downsouth

Hey those look like they could fit the bill. They look adjustable, which is a must.You are right 92.00+12.00 s&h.

Your boat sporting this setup?

---

I have the EZ pole perch for my double seat set up and the hi-teks up front. The hi teks are adjustable at the rod holders--the spiderlocks are adjustable up and down (on the shaft) and the holders--either one would fit the bill.

Wind Knot posted on 09/06 this Reconditioned Reels
Get a few 3 packs at $15 each. Then work your way up to better stuff.
You may find some good stuff at pawn shops.
Try to make things yourself instead of buying.

Quote:

---

Originally Posted by KDAVID1

I have the EZ pole perch for my double seat set up and the hi-teks up front. The hi teks are adjustable at the rod holders--the spiderlocks are adjustable up and down (on the shaft) and the holders--either one would fit the bill.

---

The cumberland double seat frame I looked at today would open and close. In other words you could set the chairs apart or close. Does your ez function in the same manner ?

Quote:

---

Originally Posted by downsouth

Hey those look like they could fit the bill. They look adjustable, which is a must.You are right 92.00+12.00 s&h.

Your boat sporting this setup?

---

mine is now. Like it. Like the Bella holder built in

Quote:

---

Originally Posted by canebreaker

Wind Knot posted on 09/06 this Reconditioned Reels
Get a few 3 packs at $15 each. Then work your way up to better stuff.
You may find some good stuff at pawn shops.
Try to make things yourself instead of buying.

---

Thanks Canebreaker I remember that link now. I have the reels taken care of. A member cut me a deal on 6 that should do nicely.

It can be expensive to start up, but listen to the advice given and take it from there as you can. I agree on the EZT Pole Perch "Honeymooner" double seat. Good price and quality product. I also agree on the HiTek rod holders. Good price and quality product. As far as bait stations, lot of different good ways to go. I now have the 12v system and use a cooler and a dove bucket from Academy. Used Gorilla glue to seal the styro foam to the bucket and turned the styro lid upside down and glued it down. Cut a half moon out of it for access to the bait and for the air line. Frabill snap on lid too. I am partial to 14' BnM ProStaff rods and got them from Monks. There again there are good options around. Good luck and let us know what works for you.

Quote:

---

Originally Posted by Gomer Snerd

mine is now. Like it. Like the Bella holder built in

---

Brella holder was 30 bucks more at cumberland if I understood right.

Question about the hitek rod holders.

Extreme v or elite ?

I have done a lot of cat fishing on the rivers and keep 10 to 20 lbs of bait alive at a time with a few bubble boxes. Trick is bottled water frozen and well water. U can treat tap water if u have no means of well water. Like other people have said there's a ton of different routes but here's what i did. Took small flip top cooler, drilled hole in top, applied two sided Velcro to bubble box and color, ran hose through cooler and then to bubble box, added 2 D batteries that last 24 hrs to 36 hrs. Pretty simple and don't have to worry about the 12 volt thing.

Quote:

---

Originally Posted by bird down

I have done a lot of cat fishing on the rivers and keep 10 to 20 lbs of bait alive at a time with a few bubble boxes. Trick is bottled water frozen and well water. U can treat tap water if u have no means of well water. Like other people have said there's a ton of different routes but here's what i did. Took small flip top cooler, drilled hole in top, applied two sided Velcro to bubble box and color, ran hose through cooler and then to bubble box, added 2 D batteries that last 24 hrs to 36 hrs. Pretty simple and don't have to worry about the 12 volt thing.

---

Same here... 28qt flip top from walmart.. The BPS bubbler are really good and great battery life on one D battery.. Mine ran for 2 straight days this weekend..

Quote:

---

Originally Posted by KDAVID1

oh no--you want the hi teks for sure--though the spyderlocks are nice too.
talking about the double seat set up--EZ Pole Perch--the guy is out of GA.
And why did Rees just now convince you to start spider rigging? I got pics from all summer:) jk
you'll love it for sure--and don't forget the drift socks--biggest one's you can get.

---

Oh no you want the SpyderLoks, you need to fish with both before you buy. Also I would put down plates and not have a dang big ole seat holder all in the way.
One other thing is to get some baitcasters and leave the spinning reals alone, you will never regret it.

I prefer the SpyderLoks and I use the Dub L Seat made by Blacklandlure , on C.com. For reels, I just got 4 casting reels for $6.99 each from this place. http://www.fishingtackleliquidators....eel-rampr.html


Attachment 137016

alot of good advice here! ive just started to buy stuff for rigg'n myself and have been lookn for a double seat and a good deal on reels, great info guys, thanks! Rees, what do u mean "u would put down plates and not have big ol seat holder in the way?

Seat bases and use removable pedastals. For the most part you are rigging a boat for alot of different styles, most of the time you dont switch gears during the day but sometimes you do, needs to be easy. Will shoot you a pic of my set up, not that it is any better than anyone else's but it is what works for me.

Best advise there is is to get in some boats with folks and diffeent set ups and try them on for size.
Set up to crank
http://i1298.photobucket.com/albums/...ps06208c25.jpg
Set up to spider rig, I use taller pedastals for this just too sorry to get em out
http://i1298.photobucket.com/albums/...psadc59c7c.jpg
Set up to drive, I changed all of it up and took pics in about 4 minutes.
http://i1298.photobucket.com/albums/...ps3c8e481b.jpg

Good advice John......thats what I did......I fished in some and looked at others. A good time to look at different set ups is to look at everones boats at camp.

I'm with k David on seat choose. When I have a kid with me, he can scoot right up to the front deck. When a big guy is with me he move back. Plus the additional seat can come right out. I have enjoyed the design of the ez pole perch seat

Dub-L-Seat (Wayne Inman, AKA Blacklandlures) has a great new design on his Dub-L-Seat now. It would be smart to give him a PM, or call him. PM me for his phone number. I use Hi-Tek holders, and love them(Front & back). I push & pull with them. The extreme holder is the best IMO, for what I do. Good luck. If you want to fish one day and check out my rig, just give me a call.

I will be following this thread closely too. I am set up for spider rigging minnows now (homemade), but only have a single seat up front and back. I need to get setup next for pulling cranks and put down a couple of extra plates. My apologies, not trying to hijack the thread.

check out the engel bait cooler at grizzly. I have the large one kept minners alive for last three days.

get the hi techs that have the deeper v's for pulling cranks.

Quote:

---

Originally Posted by DonDon

I can give you a starters design you can get from lowes for bout $60-$80 for a 4 pole and 2, 2 pole
rod holders. You dont have to get any high dollar rod holders. Get you 6-8, a minimum of 12 foot rods. 14s are better and your good to go. I've caught just as many fish as anyone else using my cheap rig. The BGJP B&M poles are great and you can get a deal from a couple places likes Monks for buying multiple rods. The rods are more important than anything else. Rod holders just hold your rods in place

---

there are two driftmaster set ups on the board that will work also .

Thanks to all for your input. We will have some decisions to make. ds