How to save 15 bucks

When you break a couple inches off the tip of your rod.
Materials needed;
small electric soldering iron,
needle nosed pliers,
1/16 drill bit,
epoxy of what ever kind fits your taste.

Heat the line guide on the tip of the rod with the soldering iron and remove the short piece of the rod from the guide. Use needle nosed pliers to do this due to the heat.
Attachment 128023

Ream the guide out by hand using the 1/6 drill bit, or what ever size bit that fits the guide comfortably.
Attachment 128024

Once the inside of the guide is clean, mix the epoxy and coat the long end of the rod and slide on the guide.
Attachment 128025

Hope this helps someone. Of course if you are rich and famous, you can just give Grizzly jig a call and get a new tip for 15 bucks.

Did the same thing not too long ago. Only difference was I used Super Glue to attach the eyelet to the rod. Works just fine, and I saved $30 (Sam Heaton Super Sensitive plus shipping) Those rods are pretty fragile.........won't stand up to truck door being slammed on them!! :yikes

Quote:

---

Originally Posted by ski trip

Did the same thing not too long ago. Only difference was I used Super Glue to attach the eyelet to the rod. Works just fine, and I saved $30 (Sam Heaton Super Sensitive plus shipping) Those rods are pretty fragile.........won't stand up to truck door being slammed on them!! :yikes

---

I've seen Nimrod fix on the fly with a hot glue stick a lighter. I've broken 3 like that, everytime on a hang up doing something stupid. The other I broke was on an 8 foot and there was no fixing it unless I had a hankering for a 5 ft.:Rofl

last tip i bought was less than 3.00, in mo. lol Fuji® Tip Tops - Per Each : Cabela's

Quote:

---

Originally Posted by warbird

last tip i bought was less than 3.00, in mo. lol

---

You shoulda bought all they had and resold them on here. Of course, I'm feeling that this may be one of these Paul Harvey things. We may need to hear the rest of the story:biggrin

Quote:

---

Originally Posted by RCC

You shoulda bought all they had and resold them on here. Of course, I'm feeling that this may be one of these Paul Harvey things. We may need to hear the rest of the story:biggrin

---

2" of grafite. lol , the rest of the story

Ooops my bad. I thought you were talking about whole tip sections. I keep some of those around myself, but so far have not needed to use due to salvaging the original tip. Grizzly has the whole tip section. They were $15 but have probably gone up. No DIY work needed. Thanks for the link and the rest of the story.:highfive

I looked at a rod tip one time (not mine) in the boat, and broke the tip.

I am not making this up.

Quote:

---

Originally Posted by RCC

I've seen Nimrod fix on the fly with a hot glue stick a lighter. I've broken 3 like that, everytime on a hang up doing something stupid. The other I broke was on an 8 foot and there was no fixing it unless I had a hankering for a 5 ft.:Rofl

---

I buy rod tip eyes in bulk . I also carry matches and hot glue sticks in my boat. I have fixed several fishing rods for folks after they knocked out ceramic ring on tip unhanging a jig while we were fishing.

Here is where I bought mine. ROD TIPS/GUIDES Oops they changed policies, must order 100 dollar min . Dang I hate that.

I keep from knocking the ring out by putting a line of super glue, Lock tite brand, around the ring and frame about twice a year.

Hey, ya'll be careful with all these great tips and ideas. You're gonna turn this thread into something other than a LOSER thread.

Quote:

---

Originally Posted by jigflinger

I keep from knocking the ring out by putting a line of super glue, Lock tite brand, around the ring and frame about twice a year.

---

I have seen you in action on the water. If anyone knows about getting hung up, you do. HeHe
DP

I do things like TRUE loosers do... I just don't replace the tip, I just continue fishing, broken pole and all. I am too cheap to do anything like run to Wally World for glue or stuff like that. When you live in the sticks places like that are just too far. Its time you could spend on the water not catching fish.

Quote:

---

Originally Posted by LMBarnett

I do things like TRUE loosers do... I just don't replace the tip, I just continue fishing, broken pole and all. I am too cheap to do anything like run to Wally World for glue or stuff like that. When you live in the sticks places like that are just too far. Its time you could spend on the water not catching fish.

---

No need to fix it. When your jig gets hung and you stick your jig pole down there to unhang the jig, if you are quick, that extra 4" of jig pole that protrudes from where the tip was is an excellent spear. You can some times spear a fish with it although you are more likely to stick it in a stump and loose the whole section.

For those of you that don't know what to do with those broken rod tips, keep a spare in your boat to put a whuppin on snakes. One good lick between the eyes and ole no shoulders will roll over for ya. :ThumbsUp

one good lick with a 380....... hey I found another way to save $ 15.00 don't buy a couple scratch off's forgot today and of course , not a winner !!

Quote:

---

Originally Posted by RCC

I've seen Nimrod fix on the fly with a hot glue stick a lighter. I've broken 3 like that, everytime on a hang up doing something stupid. The other I broke was on an 8 foot and there was no fixing it unless I had a hankering for a 5 ft.:Rofl

---

X2 , fixed one for me this year on dardenelle