Printable View
Anyone every installed a ferrite ring frm humminbird for interference issue?
Just wondering if someone has any pics. They sent directions, but i dont know the adapter cable from the universal sonar cable from my a?!?!? :)
The first pic is the directions they sent and the second is the cable on my boat where i "think" they are refering to.
Ive posted on the arkansas board and electronic board. Just wondering if anyone has installed one and possibly some pics...
Attachment 121079Attachment 121080
So what you waitin on do it!
The adapter cable is the cable that goes from the cable on your TM to the cable on your FF
See if this will help.. All they want u to do is wrap the cable from the US2 around the ring 8 times. Unplug it to do this and don't use the adapter cable in the wrap.
Attachment 121082
The cable they want you to wrap is the on on your TM.....not the adapter cable
Thats the cable in the second pic.. So when i unplug it at the plug thats in the second pic.. Which side?Quote:
Originally Posted by "G"
Use the side thats coming from your US2 on your TM
Is that the us2 cable in 2nd pic.. Sorry but i know nuttn about these but turning on and off.. LolQuote:
Originally Posted by E-Z Poleholder
That cable runs from the head of tm down the shaft to the fish finder.. So unplug it and wrap the tm side?
Thanks.. Havent got the ring yet.. Just wanting to make sure im doin it right when i get itQuote:
Originally Posted by "G"
Seems simple, just want it in the right place
Yes.....the cable on your TM
Thanks g..went a looked again, and there is no way i have enough slack to wrap 8 times and plug it back up...Quote:
Originally Posted by "G"
Guess ima have to back up and punt!!
I have not looked at mine....unsure of how much slack there is. I have not had a need for the ring....I have never had any interferrance but I do know that a lot of folks have it. But reading your instructions....thats how it reads to me. You might check with HumminbirdGreg over on the electronic board. He can tell you for sure.
Take the head cap of TM and mess the the clamp holding the us2 cableQuote:
Originally Posted by hawgdog
U should be able to get enough slack
Sent from my SAMSUNG-SGH-I777
Yeah i have it posted over there.. He wants me to post a pic of the ring when i get it.. Not sure why that matters, but oh well..Quote:
Originally Posted by "G"
Thanks again
Will do... Thanks!!Quote:
Originally Posted by KDAVID1
BigH broke 2 teeth out of his mouth when he confused it for a Krispy kream.
Bwaaaahhhhhaaaaa
On my terrova, the us2 cable comes out of the head right at the coiled up cable and runs down thru the coiled cable and out of it right at the end where it goes into the base. I have at least 6 feet of us2 cable at that point, plenty to coil 8 times in the ring. There is no need to take the cap off the top, there was no slack in mine when I took it off the other day. The adapter cable is only about 14-16 inches long, not to be used to coil anyway..
I just went and looked again.. You are right.. I didnt look close enough the fisrt time.. There does seem to be a bunch coiled up in the lower sectio of the main "coiled" line on tm.. Thanks for the help!!