Cabela's #6 sickle hooks

Will not work in my Do-It molds. Models 1250 and RHB-8-332. The eyes need to be 1/32 longer to seat in properly. #4 hooks work fine. Any suggestions?

I can tell you the guy I use to get my heads from had trouble with some #6 Sickle hooks in some weight heads and couldn't do them.

I don't know the answer though.

Skip

Is there another brand of mold they will work in for sure? 1/16 barbless, round head, production mold? If not I guess I'll have to send them back and get #4 hooks.

modify the recessed area for the hook eyes on your mold.

Quote:

---

Originally Posted by IBNFSHN

Is there another brand of mold they will work in for sure? 1/16 barbless, round head, production mold? If not I guess I'll have to send them back and get #4 hooks.

---

I really don't know, but I do know that the old guy tried to modify his mold and messed it up.

However I do buy them now from Grousefly and no problems.

Skip

With a Microlux mini drill press, the mod for short leg #6 Sickles into a Do-1250 wasn't too difficult. The hook eye slots just need to be extended towards the head cavity a smidgen. Such a small precision cut with a hand held Dremel would be risky tho.

Tools and Supplies for Building Scale Models | Micro-Mark: The Small Tool Specialists

Quote:

---

Originally Posted by 1aB

With a Microlux mini drill press, the mod for short leg #6 Sickles into a Do-1250 wasn't too difficult. The hook eye slots just need to be extended towards the head cavity a smidgen. Such a small precision cut with a hand held Dremel would be risky tho.

Tools and Supplies for Building Scale Models | Micro-Mark: The Small Tool Specialists

---

I thought about trying that. Perhaps a slightly larger drill bit in my press. It would be a delicate operation but like you said. Just a smidgen off.
This might work. http://www.mytoolstore.com/dremel/drillprs.html

Yes, a larger diameter slot would work - my 1250 was actually modified for a way oversize hook with #6 Sickle fit bonus. Like to mention tho that I've had a fair amount of practice with a decent tool for the job. I considered the Dremel press attachment but read many negative reviews online about excessive play at the bit, so opted for the Microlux. You get what you pay for.

http://i214.photobucket.com/albums/c...gs/1250mod.jpg

1ab

I like the fact that your mod shows where the original eyelet slot was and how the modification fixed it so you could use them.

Fatman

Looks good.