HaHa HaHa:  0
Results 1 to 10 of 1627

Thread: Kaw lake archives

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Join Date
    Jan 2013
    Location
    Oklahoma
    Posts
    987
    Post Thanks / Like

    Default

    I have good luck just sliding both jigheads onto the line and tying my weight on first. After the weight is tied I can slide each jighead up the line to the desired depth then use just a double overhead knot with the smallest loop I can get to set each jig where I want them. Tried a triple overhead but it breaks easier than the double using vicious high vis green 8 lb line.
    Likes Blackdog40, IceNitro LIKED above post

  2. #2
    Join Date
    Feb 2009
    Location
    Lebo.Ks
    Posts
    1,976
    Post Thanks / Like

    Default

    Quote Originally Posted by TimY View Post
    I have good luck just sliding both jigheads onto the line and tying my weight on first. After the weight is tied I can slide each jighead up the line to the desired depth then use just a double overhead knot with the smallest loop I can get to set each jig where I want them. Tried a triple overhead but it breaks easier than the double using vicious high vis green 8 lb line.
    Tim could you take a picture of your drop shot rig and post it for us. Thanks

  3. #3
    Join Date
    Jan 2013
    Location
    Oklahoma
    Posts
    987
    Post Thanks / Like

    Default

    Kinda hard to take a picture. It's just a standard drop shot rig but instead of tying the jigs with a direct knot I use a double overhand to give it a little more action. With this rig basically all I have to do is barely move the rod to get enough action in this 32 degree water. I use the 1/4 once sinker 95 % of the time unless I'm fishing deeper than 25ft and then may go to a 3/8 ounce weight. Main thing I have noticed the cylinder style weight gets through the brush a lot easier than a standard sinker so less hang ups. I always start on the edge of a brush pile and work my way into it. I usually tie my bottom jig around 15 inches above my weight so when I feel the weight hit the brush I know I can lower my rod about 15 inches and have the jig right on top of the brush. I do use light wire jig heads and don't have any problem straightening them out. I know some likes braid but we have figured out over the years if you start puling brush up out of a pile, you might as well go find a different one. Rather re-tie than move brush in a pile and spook the crappie especially in the winter when the water is clear and cold. Also have better luck keeping the sun in our face and not throwing a shadow over the piles in this clear/cold water.
    Likes IkenI, Blackdog40, fishn_a_ledge LIKED above post

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

BACK TO TOP