Thread: Seat mounts

More than likely it' the seats, not the mount. I have those mounts and I'm fatter than you. Bought some cheap seats a while back, they leaned back too far. Took them back and got some Tempress seats and they are fine on the spring mount.

Like Feelay siad probably the seats. We had to buy one when we bought our boat and didn't spend that much and a year later are having to buy another one...basically the same problem you are having...plus ours leans to one side to...lol. Guess Shorty's a little heavier on one side than the other..Ha!!

Might be right.. seats are bass pro.. not their cheap seats but still cheaper than tempess

Member, Tri State Crappie Anglers

Take the rear screws out. Loosen the front screws. Add a strip of plywood, 1/4, 3/8, 1/2" until they sit right. May have to get longer screws.

While I was looking for seats, the cheapest ones found locally were about $60. each.

Originally Posted by Gator_1

Might be right.. seats are bass pro.. not their cheap seats but still cheaper than tempess

Member, Tri State Crappie Anglers

Definitely, the problem. Those are the seats I bought and returned, metal hinges, thick comfy cushion, just no back support.

boat seats | eBay

Check it out, this is where I got mine.

Originally Posted by feelay

More than likely it' the seats, not the mount. I have those mounts and I'm fatter than you. Bought some cheap seats a while back, they leaned back too far. Took them back and got some Tempress seats and they are fine on the spring mount.

x2 even as small as I am--the cheap ones bend ALOT.

I didn't know they came with an arrow. I'm going to assume that's why my seat with the recently replaced spring base kills my back.