Thread: Help pullin cranks with Hiteks

Set up like Scott

Sent from my SAMSUNG-SGH-I897 using Tapatalk 2

Originally Posted by Tenntomm

I know several of you use Hitek trolling racks to pull cranks with, I must be doing something wrong. Ihad three different rods today jump out of the holder two only partially came out and one hit the lake, fortunately i retrieved it. I was pullin from the front with the rods out the side. I had the rods perpendicular with the boat and slightly tilted toward the water. Anybody got any suggetions?

They ARE a problem!!! For some!!! Lol


Big River Marine
Bill Burnett
870-635-0202

Thats the reason I use these.


Sent from my DROID2 using Tapatalk 2

Originally Posted by Rees Guide

Thats the reason I use these.


Sent from my DROID2 using Tapatalk 2

A friend of my at work make those... He's on here... Liveforthethump.

Sent from my HTC EVO 3D using Tapatalk 2

[QUOTE=Gator_1;1928284]A friend of my at work make those... He's on here... Liveforthethump

Those are made in Florida the guy sells them on Ebay.

I like the Hitec. We haven't had any problem out of them. Pulling out the back and sides.

Here is what I use. Made out of parts from two Titeloks.

Originally Posted by BANDIT

Here is what I use. Made out of parts from two Titeloks.

Looks good!

Sent from my HTC EVO 3D using Tapatalk 2

[QUOTE=wilbur;1928416]

Originally Posted by Gator_1

A friend of my at work make those... He's on here... Liveforthethump

Those are made in Florida the guy sells them on Ebay.

The guy at work makes them with 1 1/2" aluminium conduit... Dennis if you read this post a pic.....

This is what I use... No problems with rods jumping out at all...



Sent from my HTC EVO 3D using Tapatalk 2