Quote Originally Posted by OleMiss View Post
Guys...just use Turtle Wax buffing compound...works great and cheaper to if you already have some! put some all over light and use a drill with buffing pad....buff until its like you want it. Been doing it like this for a while at the shop.
This. I used a grinder with a buffing wheel. Be very careful if you use a grinder, it can be too fast and WILL melt the plastic if you really bear down on it. Like mentioned before, it won't last long. I polished mine a couple of times (96 Dodge) and eventually just replaced them. Should have done that in the beginning.

If you go the buffing route, wax the fool out it afterwards. It will help the polishing last a little longer.