Thread: help with seat pedestal question....................

what is the solution for a pedestal pin that has a little too much play inside the pedestal base, where the chair wobbles just a little. can anything be wrapped on the pin of the pedestal to make it a more snug fit inside the pedestal base? thanks.

I have the same wobble. I am thinking of replacing the base.

You can replace the bushing in the base....GrizzlyJig has them both the brass ones and the nylon ones....the nylon ones last a lot longer than the brass ones in my opinion.

A new base is around 40 bucks the bushings are about 5 bucks.....something like that.

Originally Posted by "G"

You can replace the bushing in the base....GrizzlyJig has them both the brass ones and the nylon ones....the nylon ones last a lot longer than the brass ones in my opinion.

X2

Sent from my SCH-I500 using Tapatalk 2

never seen a bushing in ours, g.

Originally Posted by duckhunter

never seen a bushing in ours, g.

Maybe that's why it wobbles.....bwaaaaaahahaha....had to do it.

Originally Posted by Gator_1

Maybe that's why it wobbles.....bwaaaaaahahaha....had to do it.

gator, now this is a serious, thought provoking thread.............wont you go back to looking up 2001 threads, lol. JK.

What type pedistall do you have duck? I am talking about the ones where the post has a 3/4 in. pin that sticks in a hole in the base....the base has a replaceable bushing that the post pin fits into.

mine is the same base, the only thing i can see from the top of the base is the round metal ring, looks to be built into the base. could not find the bushings on grizzly jig.