Thread: Im not sure but I believe it is EZ that is making the TM mounts

Originally Posted by CRAPPIE 123

U can also drill more holes close to the existing ones where they'd work for your setup. Get a couple on each side as close to the front as possible. I had to do the same thing on my terrova. Hope u get it figured out.

Thanks Crappie123, that is an option I think

thanks

You don't need a quick release unless you're going to be taking it off often, just the aluminum plate, like Cray said.

Originally Posted by majflyboy

You don't need a quick release unless you're going to be taking it off often, just the aluminum plate, like Cray said.

Exactly.... and make sure the plate is thick It really needs to be 1/2 inch aluminum stock.

The plate I had made is 3/8 aluminum and there is no movement other than the boat going forwrd!

Originally Posted by satdoc1

The plate I had made is 3/8 aluminum and there is no movement other than the boat going forwrd!

Thanks Sat

You might try to get in touch with Jeff White (jwhite). He has a machine shop right up there close to you.