Sea foam

**majflyboy** · 02-01-2012, 06:49 PM

Originally Posted by clock152

I ran sea Foam thru my 98 explorer (thru the brake booster) and I swear (after smokeing the whole street up for 20 min.) that I got 5 more MPG's out of the old girl... I have used it in my bike for years.

I don't understand how it gets into the engine thru the brake booster.

**"G"** · 02-01-2012, 06:52 PM

I think he poured it in the vacumn line that goes to the booster maj.....that would suck it directly in to the intake manifold. I would just pour it in the gas though......that way it would clean the injectors as well as getting the carbon out of the combustion chambers..

**majflyboy** · 02-01-2012, 06:56 PM

Originally Posted by "G"

I think he poured it in the vacumn line that goes to the booster maj.....that would suck it directly in to the intake manifold. I would just pour it in the gas though......that way it would clean the injectors as well as getting the carbon out of the combustion chambers..

Thanks G.

**Hook One** · 02-01-2012, 10:14 PM

Great info.

**canebreaker** · 02-02-2012, 07:59 AM

I buy 6 5 gal. cans of non-leaded gas at a time to keep this equipment going. I put sea foam in 3 and sta-bil in 3. Then mix it up as it's used. The boat only gets sea foam.

**clock152** · 02-02-2012, 08:14 AM

Originally Posted by majflyboy

Thanks G.

yup thats how I did it....with engine running (get some help with that part to keep the RPM's up) pour in about half a can then shut it down... let it sit for about 15 min or so then start it up and watch the neighbor's go nuts...LOL.. I put the whats left in the tank.... on my bike I run about 2 cap fulls per full tank of gas.

**torch** · 02-02-2012, 08:18 AM

When you run it through the vacuum line on brake booster it cleans all the intake chambers and the valves. Cleans the entire top of engine.

Thread: Sea foam

Thread Tools

Display

Posting Permissions