Reply With QuoteI am going to assume these all are in same switch panel? Check wiring at that panel should have one main hot wire that feeds the panel. Jar may have caused the connector to come loose. A lot of these are just push on connectors. Hope this helps.
Likes: 0
Thanks: 0
HaHa: 0
Crappie.com Legend
Boat electrical problem , help!
About half of my stuff works and half doesn't . Took a good jare from a wave nearly got air born . The depth finder on the consle works . trolling moter works . Cranks and runs fine . All fuses are good unless there are some i can't find . The livewells nav. lights , bulge pump do not work .Worked earlier today . I have fish without a fishfinder today ,I don't want to go back . getting fire to the fuse box . Cause one item works .And no I do not have a tester . ???????????
CATCH THEM ALL.
Crappie.com 2019 Man of Year, Supermod & Moderator of the Mechanics Forum
* Crappie.com Supporter
I am going to assume these all are in same switch panel? Check wiring at that panel should have one main hot wire that feeds the panel. Jar may have caused the connector to come loose. A lot of these are just push on connectors. Hope this helps.
Proud Member of Team Geezer
Charlie Weaver USN/ENC 1965-1979
Crappie.com Legend
I check this . It actually has a nut on it . One line coming out is working . the rest are not . Could the box be busted ?
Crappie.com 2019 Man of Year, Supermod & Moderator of the Mechanics Forum
* Crappie.com Supporter
Yes it could. If it's not to hard to pull might want to take it loose and see if there is some kind of common conector on back side that broke or came loose.Originally Posted by 4THETHUMP
Proud Member of Team Geezer
Charlie Weaver USN/ENC 1965-1979
Crappie.com Legend
I pulled it off could not see anything .It is on a tracker . looks very simple . Got three hook ups on each side . Nav , depth finder , and one that is always hot . The other has bulge ,aerator , and something else . The depth finder is the only one that is working out of that box .I just don't know .
Crappie.com 2019 Man of Year, Supermod & Moderator of the Mechanics Forum
* Crappie.com Supporter
There has to be something loose in there for one piece to be working and the others not. Is there a ground wire hooked there also? Check that nut for tightness if you haven't already. I have never been into a Tracker before so I can't invision the box every thing is hooked to. Is it open on the back or is the connections enclosed inside the box. If you want I'll pm my number or pm me yours and I'll try to help.
Proud Member of Team Geezer
Charlie Weaver USN/ENC 1965-1979
Crappie.com Legend
Sounds like a common ground problem to me. You need a tester or at least a test light to run it down easily though.
Wannabe...
Wannabe...v2.0
A lot like the old Wannabe... except with fewer bad words. And Karate chop action. But, yes, still purtier than you.
Crappie.com Legend
Agree with WB or the track that carries fire cross the board is broken.
Charter Member LHLC....Where the skin is thick and the stringers are heavy.
Keep looking up cause thats where it all is
PROUD MEMBER OF TEAM GEEZER
Crappie.com 2019 Man of Year, Supermod & Moderator of the Mechanics Forum
* Crappie.com Supporter
WB, maybe we need to send DD around there tomorrow.
Proud Member of Team Geezer
Charlie Weaver USN/ENC 1965-1979
Crappie.com Legend
Alright duct tape probably won't fix this . Looks like I need to get me a test light and check that .
Posting Permissions
