Likes Likes:  0
Thanks Thanks:  0
HaHa HaHa:  0
Page 1 of 3 123 LastLast
Results 1 to 10 of 24

Thread: I said I wasn't going to do this, but

  1. #1
    Join Date
    Jan 2007
    Location
    Grenada, MS
    Posts
    18,942
    Post Thanks / Like

    Default I said I wasn't going to do this, but


    ya'll are boring me to tears. HDS install preview. Wasn't going to post anything till I get it all done, but somebody's gotta say something worf readin'.

    First things first. Ya gotta stage the boat with all the parts and peices and stuff.

    Name:  IMG_1235.jpg
Views: 280
Size:  43.3 KB

    Next thing firster. It's hot out there.

    Name:  IMG_1233.jpg
Views: 310
Size:  70.4 KB

    Sometimes when I'm fixin' stuff all proper and everything, working along with my masterfull skills, only using the finest tools and doing everything with the utmost professionalism, I often wonder - what would DD think if he saw somthing like this - would he hang his head and cry? Would he break out another roll of duct tape? Would he run to the PC and ask for stewpit advice then ignore the good tips we give him for 3 weeks right up to the night before the tournament then take the duct tape and bailing wire route and swear he'll never do it again when EZ and Maj get over to his house to fix it right like it should have been in the first place?


    Name:  IMG_1237.jpg
Views: 303
Size:  61.8 KB

    Anyway, that's just one of the methods I use to keep myself entertained while I deftly manage delicate and complicated installs.


    So, that's it for now. You'll have to wait to see how this story unfolds. Basically, I plopped the power and transducer in place for the front unit and powered it up. Didn't even have time to install my "gargantuan RAM D 111 in place that will be a tripping hazzard and when I do hurt myself I'm gonna sue Yikess cause it's all his fault" mount. That's what I'm calling it anyhow.

    And unlike stories such as these from lesser skilled and remarkably homely C.Cers, yes it powered up the first time as I'm sure you expected since the poster is listed as Wannabe and not DD.

    Wannabe...
    Wannabe...v2.0
    A lot like the old Wannabe... except with fewer bad words. And Karate chop action. But, yes, still purtier than you.


  2. #2
    Join Date
    Aug 2009
    Location
    Ridgeland, MS
    Posts
    16,636
    Post Thanks / Like

    Default

    I'll give you a "go" so far.
    PROUD MEMBER OF TEAM GEEZER

  3. #3
    Join Date
    Mar 2006
    Location
    Greers Ferry, Arkansas, United States
    Posts
    9,022
    Post Thanks / Like

    Default

    I give you a C- for that cheap Stanley screwdriver in the bottom picture.

    WALLY MARSHALL PRO STAFF
    CATCHIN' CRAPPIE GUIDE SERVICE
    CREEKS ROD TRANSPORT RACK
    870-307-2572

  4. #4
    Join Date
    Jan 2010
    Location
    Madison, MS
    Posts
    3,846
    Post Thanks / Like

    Default

    We at least SAY we got faith in ya, it's a lot further to Nader than R'land, but for $200 Maj and I WILL come.... (ain't everything $200?)...

    But that's a really good fan, however much good it'll do ya on the ground..
    **** Click my Logo for products and ordering info****

  5. #5
    Join Date
    Jan 2007
    Location
    Grenada, MS
    Posts
    18,942
    Post Thanks / Like

    Default

    Ya caught me Creek. I keep only cheap tools in the boat. It was handy. What can I say.

    Wannabe...
    Wannabe...v2.0
    A lot like the old Wannabe... except with fewer bad words. And Karate chop action. But, yes, still purtier than you.


  6. #6
    Join Date
    Mar 2008
    Location
    Raleigh, MS
    Posts
    11,204
    Post Thanks / Like

    Default

    the dikes are a cheap pair too!! They probably didn't even cut, bet he used a knife and then spliced back with duct tape.

  7. #7
    Join Date
    Mar 2008
    Location
    booga bottom MS
    Posts
    6,534
    Post Thanks / Like

    Default

    WB i have one off those fans in the shop that runs water through it. It drops the temp at least 20 degrees.
    [SIGPIC]Drake Waterfowl Prostaff, Dakota Decoys Prostaff,F&F Boats, Mercury Marine, Rig Em Right, Crappie Logic Jigs, Slab Bandits, Hayes Calls, and Kick's Choke Tubes.

  8. #8
    Join Date
    Jan 2007
    Location
    Grenada, MS
    Posts
    18,942
    Post Thanks / Like

    Default

    Quote Originally Posted by tritonman View Post
    the dikes are a cheap pair too!! They probably didn't even cut, bet he used a knife and then spliced back with duct tape.
    Hmmmphh.....well, I can't argue with you cause if anyone knows anything about cheap dikes, it'd be you.

    Quote Originally Posted by torch View Post
    WB i have one off those fans in the shop that runs water through it. It drops the temp at least 20 degrees.
    Sounds perfect. Bring it to me. While you're here, I'll let you supervise and hand me diet cokes. I'll even let you play with my cheap dikes.

    Wannabe...
    Wannabe...v2.0
    A lot like the old Wannabe... except with fewer bad words. And Karate chop action. But, yes, still purtier than you.


  9. #9
    Join Date
    Jan 2006
    Location
    Mo. Barry Co.
    Posts
    18,373
    Post Thanks / Like

    Default

    cheap dikes, ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;.:pfunny

  10. #10
    Join Date
    Mar 2006
    Location
    Greers Ferry, Arkansas, United States
    Posts
    9,022
    Post Thanks / Like

    Default

    Quote Originally Posted by beagle man View Post
    cheap dikes, ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;.:pfunny
    Sounds like something Ron White would say.

    WALLY MARSHALL PRO STAFF
    CATCHIN' CRAPPIE GUIDE SERVICE
    CREEKS ROD TRANSPORT RACK
    870-307-2572

Page 1 of 3 123 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

BACK TO TOP